Dear Graeme Russ, In message <calbutcjh8bvzfvh14d83wr2jov89o9jvjo9vzzb7r_zgkzz...@mail.gmail.com> you wrote: > > > Problems happen only with multi-line input, so it is perfectly fine > > to handle just that - at the root cause, i. e. when input turns into > > multi-line input. > > Can the U-Boot command line handle multiple commands per line (delimited by > ; for example)
Yes, it can. > If so, could it not be possible that a Kermit/ymodem command followed by a > time consuming command on the same line cause lost input? I don't think so. All serial transfers use a protocol - and when the transfer is complete, it does not matter any more, because no more data are flowing. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de History tends to exaggerate. -- Col. Green, "The Savage Curtain", stardate 5906.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot