On 10/24/2011 06:37 PM, Fabio Estevam wrote: > Rename mc13783-rtc so that it can be used for both MC13783 and MC13892 PMICs. > > efikamx board, for example, does use a MC13892 PMIC, but the RTC selection is > currently made as: > > #define CONFIG_RTC_MC13783 > > ,which is not very obvious. > > Let the MC13783 and MC13892 RTC be selected by: > > #define CONFIG_RTC_MC13XXX > > Signed-off-by: Fabio Estevam <fabio.este...@freescale.com> > --- > README | 2 +- > drivers/rtc/Makefile | 2 +- > include/configs/efikamx.h | 2 +- > include/configs/imx31_litekit.h | 2 +- > include/configs/mx31ads.h | 2 +- > include/configs/mx31pdk.h | 2 +- > include/configs/qong.h | 2 +- > include/configs/vision2.h | 2 +- > 8 files changed, 8 insertions(+), 8 deletions(-)
Well, I do not see that drivers/rtc/mc13783-rtc.c becomes drivers/rtc/mc13xxx-rtc.c. You patch misses something, I suppose. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot