Hi Sandeep, Le 03/11/2011 21:11, s-paul...@ti.com a écrit : > The following changes since commit 6d66073614539d94dabff1f63ebd962840c44b81: > Thomas Herzmann (1): > arm/km: portl2 environment address update to P1B > > are available in the git repository at: > > git://git.denx.de/u-boot-ti.git master > > Bastian Ruppert (4): > Davinci: ea20: set console on UART0 > Davinci: ea20: set GPIOs to hold MII-Phy in reset and set UART0-Switch > for console > Davinci: ea20: add gpio for keeping power on in board_late_init > Davinci: ea20: add gpios for LCD backlight control > > Christian Riesch (1): > arm, davinci: Add function lpsc_syncreset() > > Heiko Schocher (13): > arm, davinci: replace CONFIG_PRELOADER with CONFIG_SPL_BUILD > arm, arm926: fix missing symbols in NAND_SPL mode > usb, davinci: add enable_vbus() weak function > arm, usb, davinci: make USBPHY_CTL register configurable > net, davinci_emac: make clock divider in MDIO control register > configurable > spl: add option for adding post memory test to the SPL framework > arm, davinci: add support for new spl framework > spl, nand: add 4bit HW ecc oob first nand_read_page function > arm, davinci: add header files for dm365 > arm, davinci: add lowlevel function for dm365 soc > arm926ejs, davinci: add cpuinfo for dm365 > arm926ejs, davinci: add missing spi defines for dm365 > arm, davinci: add cam_enc_4xx support > > Ilya Yanok (2): > davinci_emac: compilation fix, phy is array now > omap/spl: actually enable the console > > Sanjeev Premi (7): > omap3evm: Set environment variable 'ethaddr' > omap3evm: Reorder related config options > omap3evm: Prepare to split configuration > omap3evm: move common config options to new file > omap3evm: Add (quick) configuration for MMC/SD only > omap3evm: Add (quick) configuration for NAND only > omap3evm: fix errors caused by multiple definitions > > Stefano Babic (8): > Davinci: ea20: Add NAND support > Davinci: ea20: Add early init to get early output from console > Davinci: ea20: Add default U-Boot environment > ARM: Davinci: added missing registers to hardware.h > VIDEO: davinci: add framebuffer to da8xx > Davinci: ea20: added video support > Davinci: ea20: added I2C support > Davinci: ea20: added PREBOOT to configuration
Applied to u-boot-arm/master, thanks! Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot