On 11/06/2011 01:43 PM, Marek Vasut wrote: > > Yes sure, but the controller driver sets it as a chip option as there's no > "controller" option field and I don't want to introduce new definition > consuming > one bit in the top half of chip option.
Let's see how evolve the discussion - allowing to mix chip and controller options was > > No, the controller must set NAND_NO_SUBPAGE_WRITE as a chip option in its > driver > to force it so it should work for both cases. As far as I remember (not very well, I admit..), the only way for the driver to set them was in the board_nand_init(), but these options are overwritten when the flash is detected, making NAND_NO_SUBPAGE_WRITE worthless. Am I wrong ? Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
