Dear Albert ARIBAUD, In message <4eb84664.50...@aribaud.net> you wrote: > Hi Wolfgang, > > The following changes since commit fec79acc864bed049b6beae719ccbf2bbec5403a: > > sandbox: drop unused return (2011-11-03 22:35:25 +0100) > > are available in the git repository at: > git://git.denx.de/u-boot-arm.git master > > Ajay Bhargav (1): > gplugD: Fix for error:MACH_TYPE_SHEEVAD undeclared > > Anatolij Gustschin (4): > ARM: netspace_v2: fix warnings > ARM: DockStar: fix compilation > ARM: dreamplug: fix compilation > imx: imx31_phycore.h: fix checkpatch warnings > > Angus Ainslie (2): > ORIGEN : enable device tree support > ORIGEN : use absolute paths and fix tool naming > > Bastian Ruppert (4): > Davinci: ea20: set console on UART0 > Davinci: ea20: set GPIOs to hold MII-Phy in reset and set > UART0-Switch for console > Davinci: ea20: add gpio for keeping power on in board_late_init > Davinci: ea20: add gpios for LCD backlight control > > Chander Kashyap (4): > SMDKV310: Initialize board id using CONFIG_MACH_TYPE > SMDKV310: use get_ram_size() to validate dram size > smdkv310: use spl framework for mmc spl > smdkv310: use macro for mmc data read function address > > Christian Riesch (1): > arm, davinci: Add function lpsc_syncreset() > > Daniel Gorsulowski (2): > at91: defined mach-types for meesc board in board config file > at91: defined mach-types for otc570 board in board config file > > Fabio Estevam (22): > qong: remove unneeded "1" from qong.h > mx31pdk: Add MC13783 PMIC support > mx31: Introduce mx31_set_gpr function > qong: Use mx31_set_gpr to setup USBH2 pins > qong: remove unneeded IOMUX settings > rtc: Make mc13783-rtc driver generic > mx51evk: Add RTC support > mx51evk: Use GPIO API for configuring the IOMUX > mx35pdk: Add RTC support > mx51evk: Remove unneeded '1' from mx51evk.h > mx51evk: Remove unused get_board_rev function > vision2: Remove unused header file > mx53evk: Remove unneeded '1' from mx53evk.h > mx53loco: Remove unused get_board_rev function > mx53evk: Add RTC support > mx53evk: Remove unused get_board_rev function > mx53ard: Remove unused get_board_rev function > mx53smd: Remove unused get_board_rev function > vision2: Remove unused get_board_rev function > mx53: Turn off child clocks before reconfigure perclk_root > README: Fix supported i.MX SoC list for CONFIG_MXC_SPI > mx31pdk: Enable D and I caches > > Heiko Schocher (13): > arm, davinci: replace CONFIG_PRELOADER with CONFIG_SPL_BUILD > arm, arm926: fix missing symbols in NAND_SPL mode > usb, davinci: add enable_vbus() weak function > arm, usb, davinci: make USBPHY_CTL register configurable > net, davinci_emac: make clock divider in MDIO control register > configurable > spl: add option for adding post memory test to the SPL framework > arm, davinci: add support for new spl framework > spl, nand: add 4bit HW ecc oob first nand_read_page function > arm, davinci: add header files for dm365 > arm, davinci: add lowlevel function for dm365 soc > arm926ejs, davinci: add cpuinfo for dm365 > arm926ejs, davinci: add missing spi defines for dm365 > arm, davinci: add cam_enc_4xx support > > Helmut Raiger (4): > misc: pmic: fix regression in pmic_fsl.c (SPI) > mx31: define pins and init for UART2 and CSPI3 > mx31: add ESD control registers > mx31: Add board support for HALE TT-01 > > Holger Brunck (6): > arm/km: add variable waitforne to mgcoge3un > arm/km/mgcoge3un: enhance "waitforne" feature > arm/km: add boardid and hwkey to kernel command line > arm/km: trigger reconfiguration for the Xilinx FPGA > arm/km: enable jffs2 cmds > arm/km: adapt bootcounter evaluation > > Ilya Yanok (2): > davinci_emac: compilation fix, phy is array now > omap/spl: actually enable the console > > Jens Scharsig (1): > Arm: re-introduce the MACH_TYPE_XXXXXX for EB_CPUX9K2 board > > Lei Wen (2): > pantheon: define CONFIG_SYS_CACHELINE_SIZE > armada100: define CONFIG_SYS_CACHELINE_SIZE > > Luca Ceresoli (1): > ARM: dig297: Define MACH_TYPE_OMAP3_CPS and CONFIG_MACH_TYPE > > Marek Vasut (1): > I2C: Fix mxc_i2c.c problem on imx31_phycore > > Matthias Weisser (1): > arm: jadecpu: Readd MACH_TYPE_JADECPU > > Michael Jones (1): > OMAP3: mvblx: Initial support for mvBlueLYNX-X > > Michael Walle (1): > kirkwood: define CONFIG_SYS_CACHELINE_SIZE > > Mike Frysinger (1): > kirkwood: drop empty asm-offsets.s file > > Sanjeev Premi (10): > omap3evm: Set environment variable 'ethaddr' > omap3evm: Reorder related config options > omap3evm: Prepare to split configuration > omap3evm: move common config options to new file > omap3evm: Add (quick) configuration for MMC/SD only > omap3evm: Add (quick) configuration for NAND only > omap3evm: fix errors caused by multiple definitions > omap3: mem: Define and use common macros > omap3: mem: Clean-up whitespaces > omap3: mem: Move comments next to definitions > > Simon Guinot (2): > netspace_v2: fix SDRAM configuration > netspace_v2: enable I2C EEPROM support > > Stefano Babic (17): > MX35: added ESDC structure to imx-regs > MX35: add pins definition for UART3 > MX35: add reset cause as provided by other i.MX > MX35: factorize common assembly code > I2C: added I2C-2 and I2C-3 to MX35 > MX35: Drop unnecessary prototypes from imx-regs.h > MX51: vision2: add MACH_TYPE in config file > MX35: add support for flea3 board > MX25: tx25: Fix building due to missing MACH_TYPE > Davinci: ea20: Add NAND support > Davinci: ea20: Add early init to get early output from console > Davinci: ea20: Add default U-Boot environment > ARM: Davinci: added missing registers to hardware.h > VIDEO: davinci: add framebuffer to da8xx > Davinci: ea20: added video support > Davinci: ea20: added I2C support > Davinci: ea20: added PREBOOT to configuration > > Thomas Herzmann (1): > arm/km: portl2 environment address update to P1B > > Tom Rini (2): > am335x: Temporarily add MACH_TYPE define > am335x: Drop board_sysinfo struct > > Valentin Longchamp (1): > ARM: Reintroduce MACH_TYPE_KM_KIRKWOOD for keymile ARM boards > > Wolfgang Denk (1): > qong: enable support for compressed images > > Wolfgang Grandegger (2): > mx5 configs: CONFIG_PRIME should really be CONFIG_ETHPRIME > ehci-mxc: remove incorrect comment > > Ćukasz Majewski (3): > dcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p GONI target > dcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p UNIVERSAL C210 > target > misc:pmic:samsung Enable PMIC driver at C210 Universal target > > MAINTAINERS | 10 + > Makefile | 8 +- > README | 9 +- > arch/arm/cpu/arm1136/mx31/devices.c | 15 + > arch/arm/cpu/arm1136/mx31/generic.c | 15 + > arch/arm/cpu/arm1136/mx35/generic.c | 31 +- > arch/arm/cpu/arm926ejs/davinci/Makefile | 5 + > arch/arm/cpu/arm926ejs/davinci/cpu.c | 27 +- > arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c | 439 ++++++++++ > arch/arm/cpu/arm926ejs/davinci/psc.c | 20 +- > arch/arm/cpu/arm926ejs/davinci/spl.c | 63 ++ > arch/arm/cpu/arm926ejs/start.S | 31 +- > arch/arm/cpu/armv7/mx5/lowlevel_init.S | 15 + > arch/arm/cpu/armv7/omap-common/spl.c | 2 + > arch/arm/include/asm/arch-am33xx/sys_proto.h | 7 - > arch/arm/include/asm/arch-armada100/config.h | 2 + > arch/arm/include/asm/arch-davinci/aintc_defs.h | 50 ++ > arch/arm/include/asm/arch-davinci/da8xx-fb.h | 126 +++ > arch/arm/include/asm/arch-davinci/dm365_lowlevel.h | 41 + > arch/arm/include/asm/arch-davinci/hardware.h | 27 +- > arch/arm/include/asm/arch-davinci/pll_defs.h | 84 ++ > arch/arm/include/asm/arch-davinci/psc_defs.h | 86 ++ > arch/arm/include/asm/arch-davinci/syscfg_defs.h | 66 ++ > arch/arm/include/asm/arch-kirkwood/config.h | 3 +- > arch/arm/include/asm/arch-mx31/clock.h | 2 + > arch/arm/include/asm/arch-mx31/imx-regs.h | 67 ++ > arch/arm/include/asm/arch-mx35/imx-regs.h | 34 +- > arch/arm/include/asm/arch-mx35/lowlevel_macro.S | 140 ++++ > arch/arm/include/asm/arch-mx35/mx35_pins.h | 3 + > arch/arm/include/asm/arch-omap3/mem.h | 217 +++--- > arch/arm/include/asm/arch-pantheon/config.h | 2 + > board/CarMediaLab/flea3/Makefile | 49 ++ > board/CarMediaLab/flea3/flea3.c | 289 +++++++ > board/CarMediaLab/flea3/lowlevel_init.S | 79 ++ > board/LaCie/netspace_v2/kwbimage-is2.cfg | 162 ++++ > board/LaCie/netspace_v2/kwbimage.cfg | 4 +- > board/LaCie/netspace_v2/netspace_v2.c | 1 + > board/Marvell/dreamplug/dreamplug.c | 1 + > board/Seagate/dockstar/dockstar.c | 2 + > board/ait/cam_enc_4xx/Makefile | 46 ++ > board/ait/cam_enc_4xx/cam_enc_4xx.c | 446 +++++++++++ > board/ait/cam_enc_4xx/config.mk | 15 + > .../ait/cam_enc_4xx/u-boot-spl.lds | 63 +- > board/ait/cam_enc_4xx/ublimage.cfg | 48 ++ > board/comelit/dig297/dig297.c | 2 - > board/davedenx/qong/qong.c | 8 +- > board/davinci/common/misc.c | 2 +- > board/davinci/ea20/ea20.c | 205 ++++- > board/freescale/mx31pdk/mx31pdk.c | 20 + > board/freescale/mx35pdk/mx35pdk.h | 18 - > board/freescale/mx51evk/mx51evk.c | 17 +- > board/freescale/mx53ard/mx53ard.c | 5 - > board/freescale/mx53evk/mx53evk.c | 5 - > board/freescale/mx53loco/mx53loco.c | 5 - > board/freescale/mx53smd/mx53smd.c | 5 - > board/hale/tt01/Makefile | 51 ++ > board/hale/tt01/lowlevel_init.S | 32 + > board/hale/tt01/tt01.c | 200 +++++ > board/karo/tx25/tx25.c | 1 - > board/keymile/km_arm/km_arm.c | 55 +- > board/matrix_vision/mvblx/Makefile | 53 ++ > board/matrix_vision/mvblx/config.mk | 33 + > board/matrix_vision/mvblx/fpga.c | 219 +++++ > board/matrix_vision/mvblx/fpga.h | 32 + > board/matrix_vision/mvblx/mvblx.c | 169 ++++ > board/matrix_vision/mvblx/mvblx.h | 362 +++++++++ > board/matrix_vision/mvblx/sys_eeprom.c | 395 +++++++++ > board/samsung/origen/Makefile | 6 +- > board/samsung/smdkv310/Makefile | 19 +- > .../board => board}/samsung/smdkv310/mmc_boot.c | 15 +- > board/samsung/smdkv310/smdkv310.c | 13 +- > .../samsung/smdkv310/tools/mkv310_image.c | 0 > board/samsung/universal_c210/universal.c | 5 + > board/syteco/jadecpu/jadecpu.c | 1 - > board/ti/evm/evm.c | 15 + > board/ttcontrol/vision2/vision2.c | 10 - > boards.cfg | 8 +- > doc/README.SPL | 2 + > doc/README.davinci.nand_spl | 141 ++++ > doc/README.omap3 | 5 + > drivers/i2c/mxc_i2c.c | 41 +- > drivers/misc/pmic_fsl.c | 5 +- > drivers/misc/pmic_spi.c | 3 +- > drivers/mtd/nand/Makefile | 3 + > drivers/mtd/nand/nand_spl_load.c | 56 ++ > drivers/mtd/nand/nand_spl_simple.c | 43 +- > drivers/net/davinci_emac.c | 11 +- > drivers/net/mvgbe.c | 1 + > drivers/rtc/Makefile | 2 +- > drivers/rtc/{mc13783-rtc.c => mc13xxx-rtc.c} | 0 > drivers/rtc/mvrtc.c | 1 + > drivers/usb/host/ehci-mxc.c | 1 - > drivers/usb/musb/davinci.c | 20 +- > drivers/video/Makefile | 1 + > drivers/video/da8xx-fb.c | 846 > ++++++++++++++++++++ > include/configs/am335x_evm.h | 1 + > include/configs/cam_enc_4xx.h | 453 +++++++++++ > include/configs/dig297.h | 8 + > include/configs/ea20.h | 126 +++- > include/configs/eb_cpux9k2.h | 2 + > include/configs/efikamx.h | 2 +- > include/configs/flea3.h | 286 +++++++ > include/configs/gplugd.h | 12 +- > include/configs/imx31_litekit.h | 2 +- > include/configs/imx31_phycore.h | 153 ++-- > include/configs/jadecpu.h | 4 + > include/configs/km/km_arm.h | 9 +- > include/configs/km_kirkwood.h | 3 + > include/configs/meesc.h | 8 + > include/configs/mgcoge3un.h | 2 + > include/configs/mx31ads.h | 2 +- > include/configs/mx31pdk.h | 2 +- > include/configs/mx35pdk.h | 2 + > include/configs/mx51evk.h | 14 +- > include/configs/mx53ard.h | 3 +- > include/configs/mx53evk.h | 19 +- > include/configs/mx53loco.h | 3 +- > include/configs/mx53smd.h | 3 +- > include/configs/netspace_v2.h | 18 +- > include/configs/omap3_evm.h | 331 ++------- > include/configs/omap3_evm_common.h | 292 +++++++ > include/configs/omap3_evm_quick_mmc.h | 91 +++ > include/configs/omap3_evm_quick_nand.h | 79 ++ > include/configs/omap3_mvblx.h | 313 ++++++++ > include/configs/origen.h | 3 + > include/configs/otc570.h | 7 + > include/configs/portl2.h | 6 +- > include/configs/qong.h | 41 +- > include/configs/s5p_goni.h | 2 + > include/configs/s5pc210_universal.h | 19 + > include/configs/smdkv310.h | 8 +- > include/configs/tt01.h | 254 ++++++ > include/configs/tx25.h | 6 + > include/configs/vision2.h | 6 +- > mmc_spl/board/samsung/smdkv310/Makefile | 106 --- > spl/Makefile | 3 +- > tools/ublimage.h | 2 +- > 137 files changed, 7876 insertions(+), 850 deletions(-) > create mode 100644 arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c > create mode 100644 arch/arm/cpu/arm926ejs/davinci/spl.c > delete mode 100644 arch/arm/cpu/arm926ejs/kirkwood/asm-offsets.s > create mode 100644 arch/arm/include/asm/arch-davinci/aintc_defs.h > create mode 100644 arch/arm/include/asm/arch-davinci/da8xx-fb.h > create mode 100644 arch/arm/include/asm/arch-davinci/dm365_lowlevel.h > create mode 100644 arch/arm/include/asm/arch-davinci/pll_defs.h > create mode 100644 arch/arm/include/asm/arch-davinci/psc_defs.h > create mode 100644 arch/arm/include/asm/arch-davinci/syscfg_defs.h > create mode 100644 arch/arm/include/asm/arch-mx35/lowlevel_macro.S > create mode 100644 board/CarMediaLab/flea3/Makefile > create mode 100644 board/CarMediaLab/flea3/flea3.c > create mode 100644 board/CarMediaLab/flea3/lowlevel_init.S > create mode 100644 board/LaCie/netspace_v2/kwbimage-is2.cfg > create mode 100644 board/ait/cam_enc_4xx/Makefile > create mode 100644 board/ait/cam_enc_4xx/cam_enc_4xx.c > create mode 100644 board/ait/cam_enc_4xx/config.mk > rename mmc_spl/board/samsung/smdkv310/u-boot.lds => > board/ait/cam_enc_4xx/u-boot-spl.lds (63%) > create mode 100644 board/ait/cam_enc_4xx/ublimage.cfg > create mode 100644 board/hale/tt01/Makefile > create mode 100644 board/hale/tt01/lowlevel_init.S > create mode 100644 board/hale/tt01/tt01.c > create mode 100644 board/matrix_vision/mvblx/Makefile > create mode 100644 board/matrix_vision/mvblx/config.mk > create mode 100644 board/matrix_vision/mvblx/fpga.c > create mode 100644 board/matrix_vision/mvblx/fpga.h > create mode 100644 board/matrix_vision/mvblx/mvblx.c > create mode 100644 board/matrix_vision/mvblx/mvblx.h > create mode 100644 board/matrix_vision/mvblx/sys_eeprom.c > rename {mmc_spl/board => board}/samsung/smdkv310/mmc_boot.c (83%) > rename {mmc_spl/board => board}/samsung/smdkv310/tools/mkv310_image.c > (100%) > create mode 100644 doc/README.davinci.nand_spl > create mode 100644 drivers/mtd/nand/nand_spl_load.c > rename drivers/rtc/{mc13783-rtc.c => mc13xxx-rtc.c} (100%) > create mode 100644 drivers/video/da8xx-fb.c > create mode 100644 include/configs/cam_enc_4xx.h > create mode 100644 include/configs/flea3.h > create mode 100644 include/configs/omap3_evm_common.h > create mode 100644 include/configs/omap3_evm_quick_mmc.h > create mode 100644 include/configs/omap3_evm_quick_nand.h > create mode 100644 include/configs/omap3_mvblx.h > create mode 100644 include/configs/tt01.h > delete mode 100644 mmc_spl/board/samsung/smdkv310/Makefile
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Steal five dollars and you were a petty thief. Steal thousands of dollars and you are either a government or a hero. - Terry Pratchett, _Going_Postal_ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot