> Marek Vasut wrote: > >> Marek Vasut wrote: > >>>> Hi Marek, > >>>> > >>>> u-boot-v2011.09 doesn't support for imx28. I need complete support > >>>> patch for mx28. where can i get those patches? > >>>> > >>>> for which version of u-boot this patches supports..? > >>>> > >>>> > >>>> Regards, > >>>> Manoj > >>> > >>> http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary > >>> > >>> M > >> > >> Thanks Marek, > >> Patches applied.. > >> on usb start command i'm getting "scanning bus for devices... New Device > >> 0" then its freezes after getting the debug message > >> "enabling power on all ports > >> usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 > >> length 0x0" > >> can u help me on this further? > >> > >> Regards, > >> Manoj > > > > There is a mail with subject "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c > > on xscale" in uboot ML ... apply the patch and retry. What GCC do you > > use? > > > > M > > Hello Marek, > > I'm using > u-boot version : u-boot-imx > > gcc version:4.3.3 > > When i try to add this Patch "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c > on xscale" > I'm getting: > patching file usb.c > Hunk #1 FAILED at 263. > Hunk #2 FAILED at 313. > 2 out of 2 hunks FAILED -- saving rejects to file usb.c.rej > > then i made some changes for common/usb.c as per the patch,even it gets > freezes after printing the debug msg. > "enabling power on all ports > usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 > length 0x0" > > Regards, > Manoj
Are you using top-of-the-tree u-boot-imx/master? You shouldn't need to apply any patches. That'd explain why you're getting errors applying the last USB patch I suggested. Also, please try ELDK5.0 toolchain. M _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot