On 11/02/2011 08:30 PM, Andy Fleming wrote: > On Mon, Oct 31, 2011 at 11:51 AM, Stephen Warren <swar...@nvidia.com> wrote: >> Pass the GPIO numbers for power and card detect to tegra2_mmc_init(), and >> modify that function to perform all required GPIO initialization. This >> removes the need for board files to perform these operations. >> >> Move board_mmc_getcd() into tegra2_mmc.c now that the driver knows which >> GPIOs to use. >> >> Update affected call-sites in seaboard.c and harmony.c. Note that this >> change should make all SD ports work on Harmony, since the required GPIO >> setup is now being performed. >> >> v4: Fix prototype of tegra2_mmc_init() in board.h to match driver change. >> Remove prototype of gpio_config_mmc() from board.h >> >> Signed-off-by: Stephen Warren <swar...@nvidia.com> >> Cc: Andy Fleming <aflem...@gmail.com> >> Tested-by: Simon Glass <s...@chromium.org> >> Acked-by: Simon Glass <s...@chromium.org> > > This patch depends heavily on patch #2 (ie, won't apply without it), > which doesn't touch drivers/mmc. > > Lacking an ACK from Albert, I hesitate to just apply the whole series. > I've applied patch #1, and I'll let Albert decide whether to apply the > other 3: > > Acked-by: Andy Fleming <aflem...@freescale.com> > > I have also re-assigned this patch in patchworks to Albert.
Albert, Do the remaining 3 patches in this series look good? Thanks. -- nvpublic _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot