Hi Marek,
On Mon, Nov 28, 2011 at 9:21 AM, Marek Vasut <marek.va...@gmail.com> wrote:
>> Hi Marek,
>>
>> On Fri, Nov 25, 2011 at 10:53 AM, Marek Vasut <marek.va...@gmail.com> wrote:
>> > The board is unmaintained and maintainer doesn't respond.
>>
>> Should this and the other patches be version 2, or perhaps 3?
>
> Probably.
>>
>> Also I like Mike's suggested phrasing (something like "The board
>> doesn't build and maintainer doesn't respond") since if it built OK we
>> would presumably just leave it.
>
> I think they don't build, at least that's how it was when I recently tried.
> And
> since I don't see any opposing force, let's drop them.
OK, so does that mean you will change the commit message along these
lines and issue a new version?
Regards,
Simon
>
> M
>>
>> Regards,
>> Simon
>>
>> > Signed-off-by: Marek Vasut <marek.va...@gmail.com>
>> > Cc: Simon Glass <s...@chromium.org>
>> > Cc: Anatolij Gustschin <ag...@denx.de>
>> > ---
>> > MAINTAINERS | 4 -
>> > board/cerf250/Makefile | 43 -----
>> > board/cerf250/cerf250.c | 85 ---------
>> > board/cerf250/flash.c | 429
>> > --------------------------------------------- boards.cfg
>> > | 1 -
>> > doc/README.scrapyard | 1 +
>> > include/configs/cerf250.h | 229 ------------------------
>> > 7 files changed, 1 insertions(+), 791 deletions(-)
>> > delete mode 100644 board/cerf250/Makefile
>> > delete mode 100644 board/cerf250/cerf250.c
>> > delete mode 100644 board/cerf250/flash.c
>> > delete mode 100644 include/configs/cerf250.h
>> >
>> > diff --git a/MAINTAINERS b/MAINTAINERS
>> > index 37bbb34..3835154 100644
>> > --- a/MAINTAINERS
>> > +++ b/MAINTAINERS
>> > @@ -711,10 +711,6 @@ Sergey Kubushyn <k...@koi8.net>
>> > SONATA ARM926EJS
>> > SCHMOOGIE ARM926EJS
>> >
>> > -Prakash Kumar <prak...@embedx.com>
>> > -
>> > - cerf250 xscale/pxa
>> > -
>> > Vipin Kumar <vipin.ku...@st.com>
>> >
>> > spear300 ARM926EJS (spear300 Soc)
>> > diff --git a/board/cerf250/Makefile b/board/cerf250/Makefile
>> > deleted file mode 100644
>> > index cf4742e..0000000
>> > --- a/board/cerf250/Makefile
>> > +++ /dev/null
>> > @@ -1,43 +0,0 @@
>> > -#
>> > -# (C) Copyright 2000-2006
>> > -# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
>> > -#
>> > -# See file CREDITS for list of people who contributed to this
>> > -# project.
>> > -#
>> > -# This program is free software; you can redistribute it and/or
>> > -# modify it under the terms of the GNU General Public License as
>> > -# published by the Free Software Foundation; either version 2 of
>> > -# the License, or (at your option) any later version.
>> > -#
>> > -# This program is distributed in the hope that it will be useful,
>> > -# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> > -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> > -# GNU General Public License for more details.
>> > -#
>> > -# You should have received a copy of the GNU General Public License
>> > -# along with this program; if not, write to the Free Software
>> > -# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> > -# MA 02111-1307 USA
>> > -#
>> > -
>> > -include $(TOPDIR)/config.mk
>> > -
>> > -LIB = $(obj)lib$(BOARD).o
>> > -
>> > -COBJS := cerf250.o flash.o
>> > -
>> > -SRCS := $(COBJS:.o=.c)
>> > -OBJS := $(addprefix $(obj),$(COBJS))
>> > -
>> > -$(LIB): $(obj).depend $(OBJS)
>> > - $(call cmd_link_o_target, $(OBJS))
>> > -
>> > -########################################################################
>> > # -
>> > -# defines $(obj).depend target
>> > -include $(SRCTREE)/rules.mk
>> > -
>> > -sinclude $(obj).depend
>> > -
>> > -########################################################################
>> > # diff --git a/board/cerf250/cerf250.c b/board/cerf250/cerf250.c
>> > deleted file mode 100644
>> > index 043afea..0000000
>> > --- a/board/cerf250/cerf250.c
>> > +++ /dev/null
>> > @@ -1,85 +0,0 @@
>> > -/*
>> > - * (C) Copyright 2002
>> > - * Kyle Harris, Nexus Technologies, Inc. khar...@nexus-tech.net
>> > - *
>> > - * (C) Copyright 2002
>> > - * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
>> > - * Marius Groeger <mgroe...@sysgo.de>
>> > - *
>> > - * See file CREDITS for list of people who contributed to this
>> > - * project.
>> > - *
>> > - * This program is free software; you can redistribute it and/or
>> > - * modify it under the terms of the GNU General Public License as
>> > - * published by the Free Software Foundation; either version 2 of
>> > - * the License, or (at your option) any later version.
>> > - *
>> > - * This program is distributed in the hope that it will be useful,
>> > - * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> > - * GNU General Public License for more details.
>> > - *
>> > - * You should have received a copy of the GNU General Public License
>> > - * along with this program; if not, write to the Free Software
>> > - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> > - * MA 02111-1307 USA
>> > - */
>> > -
>> > -#include <common.h>
>> > -#include <netdev.h>
>> > -
>> > -DECLARE_GLOBAL_DATA_PTR;
>> > -
>> > -/*
>> > ------------------------------------------------------------------------
>> > - */ -
>> > -
>> > -/*
>> > - * Miscelaneous platform dependent initialisations
>> > - */
>> > -
>> > -int board_init (void)
>> > -{
>> > - /* We have RAM, disable cache */
>> > - dcache_disable();
>> > - icache_disable();
>> > -
>> > - /* arch number of cerf PXA Board */
>> > - gd->bd->bi_arch_number = MACH_TYPE_PXA_CERF;
>> > -
>> > - /* adress of boot parameters */
>> > - gd->bd->bi_boot_params = 0xa0000100;
>> > -
>> > - return 0;
>> > -}
>> > -
>> > -int board_late_init(void)
>> > -{
>> > - setenv("stdout", "serial");
>> > - setenv("stderr", "serial");
>> > - return 0;
>> > -}
>> > -
>> > -extern void pxa_dram_init(void);
>> > -int dram_init(void)
>> > -{
>> > - pxa_dram_init();
>> > - gd->ram_size = PHYS_SDRAM_1_SIZE;
>> > - return 0;
>> > -}
>> > -
>> > -void dram_init_banksize(void)
>> > -{
>> > - gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
>> > - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
>> > -}
>> > -
>> > -#ifdef CONFIG_CMD_NET
>> > -int board_eth_init(bd_t *bis)
>> > -{
>> > - int rc = 0;
>> > -#ifdef CONFIG_SMC91111
>> > - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
>> > -#endif
>> > - return rc;
>> > -}
>> > -#endif
>> > diff --git a/board/cerf250/flash.c b/board/cerf250/flash.c
>> > deleted file mode 100644
>> > index e1e7807..0000000
>> > --- a/board/cerf250/flash.c
>> > +++ /dev/null
>> > @@ -1,429 +0,0 @@
>> > -/*
>> > - * (C) Copyright 2001
>> > - * Kyle Harris, Nexus Technologies, Inc. khar...@nexus-tech.net
>> > - *
>> > - * (C) Copyright 2001
>> > - * Wolfgang Denk, DENX Software Engineering, w...@denx.de.
>> > - *
>> > - * See file CREDITS for list of people who contributed to this
>> > - * project.
>> > - *
>> > - * This program is free software; you can redistribute it and/or
>> > - * modify it under the terms of the GNU General Public License as
>> > - * published by the Free Software Foundation; either version 2 of
>> > - * the License, or (at your option) any later version.
>> > - *
>> > - * This program is distributed in the hope that it will be useful,
>> > - * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> > - * GNU General Public License for more details.
>> > - *
>> > - * You should have received a copy of the GNU General Public License
>> > - * along with this program; if not, write to the Free Software
>> > - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> > - * MA 02111-1307 USA
>> > - */
>> > -
>> > -#include <common.h>
>> > -#include <linux/byteorder/swab.h>
>> > -
>> > -
>> > -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH
>> > chips */ -
>> > -/* Board support for 1 or 2 flash devices */
>> > -#define FLASH_PORT_WIDTH32
>> > -#undef FLASH_PORT_WIDTH16
>> > -
>> > -#ifdef FLASH_PORT_WIDTH16
>> > -#define FLASH_PORT_WIDTH ushort
>> > -#define FLASH_PORT_WIDTHV vu_short
>> > -#define SWAP(x) __swab16(x)
>> > -#else
>> > -#define FLASH_PORT_WIDTH ulong
>> > -#define FLASH_PORT_WIDTHV vu_long
>> > -#define SWAP(x) __swab32(x)
>> > -#endif
>> > -
>> > -#define FPW FLASH_PORT_WIDTH
>> > -#define FPWV FLASH_PORT_WIDTHV
>> > -
>> > -#define mb() __asm__ __volatile__ ("" : : : "memory")
>> > -
>> > -/*----------------------------------------------------------------------
>> > - - * Functions
>> > - */
>> > -static ulong flash_get_size (FPW *addr, flash_info_t *info);
>> > -static int write_data (flash_info_t *info, ulong dest, FPW data);
>> > -static void flash_get_offsets (ulong base, flash_info_t *info);
>> > -void inline spin_wheel (void);
>> > -
>> > -/*----------------------------------------------------------------------
>> > - - */
>> > -
>> > -unsigned long flash_init (void)
>> > -{
>> > - int i;
>> > - ulong size = 0;
>> > -
>> > - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
>> > - switch (i) {
>> > - case 0:
>> > - flash_get_size ((FPW *) PHYS_FLASH_1,
>> > &flash_info[i]); - flash_get_offsets
>> > (PHYS_FLASH_1, &flash_info[i]); - break;
>> > - case 1:
>> > - flash_get_size ((FPW *) PHYS_FLASH_2,
>> > &flash_info[i]); - flash_get_offsets
>> > (PHYS_FLASH_2, &flash_info[i]); - break;
>> > - default:
>> > - panic ("configured too many flash banks!\n");
>> > - break;
>> > - }
>> > - size += flash_info[i].size;
>> > - }
>> > -
>> > - /* Protect monitor and environment sectors
>> > - */
>> > - flash_protect ( FLAG_PROTECT_SET,
>> > - CONFIG_SYS_FLASH_BASE,
>> > - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
>> > - &flash_info[0] );
>> > -
>> > - flash_protect ( FLAG_PROTECT_SET,
>> > - CONFIG_ENV_ADDR,
>> > - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
>> > &flash_info[0] ); -
>> > - return size;
>> > -}
>> > -
>> > -/*----------------------------------------------------------------------
>> > - - */
>> > -static void flash_get_offsets (ulong base, flash_info_t *info)
>> > -{
>> > - int i;
>> > -
>> > - if (info->flash_id == FLASH_UNKNOWN) {
>> > - return;
>> > - }
>> > -
>> > - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
>> > - for (i = 0; i < info->sector_count; i++) {
>> > - info->start[i] = base + (i *
>> > PHYS_FLASH_SECT_SIZE); - info->protect[i] = 0;
>> > - }
>> > - }
>> > -}
>> > -
>> > -/*----------------------------------------------------------------------
>> > - - */
>> > -void flash_print_info (flash_info_t *info)
>> > -{
>> > - int i;
>> > -
>> > - if (info->flash_id == FLASH_UNKNOWN) {
>> > - printf ("missing or unknown FLASH type\n");
>> > - return;
>> > - }
>> > -
>> > - switch (info->flash_id & FLASH_VENDMASK) {
>> > - case FLASH_MAN_INTEL:
>> > - printf ("INTEL ");
>> > - break;
>> > - default:
>> > - printf ("Unknown Vendor ");
>> > - break;
>> > - }
>> > -
>> > - switch (info->flash_id & FLASH_TYPEMASK) {
>> > - case FLASH_28F128J3A:
>> > - printf ("28F128J3A\n");
>> > - break;
>> > - default:
>> > - printf ("Unknown Chip Type\n");
>> > - break;
>> > - }
>> > -
>> > - printf (" Size: %ld MB in %d Sectors\n",
>> > - info->size >> 20, info->sector_count);
>> > -
>> > - printf (" Sector Start Addresses:");
>> > - for (i = 0; i < info->sector_count; ++i) {
>> > - if ((i % 5) == 0)
>> > - printf ("\n ");
>> > - printf (" %08lX%s",
>> > - info->start[i],
>> > - info->protect[i] ? " (RO)" : " ");
>> > - }
>> > - printf ("\n");
>> > - return;
>> > -}
>> > -
>> > -/*
>> > - * The following code cannot be run from FLASH!
>> > - */
>> > -static ulong flash_get_size (FPW *addr, flash_info_t *info)
>> > -{
>> > - volatile FPW value;
>> > -
>> > - /* Write auto select command: read Manufacturer ID */
>> > - addr[0x5555] = (FPW) 0x00AA00AA;
>> > - addr[0x2AAA] = (FPW) 0x00550055;
>> > - addr[0x5555] = (FPW) 0x00900090;
>> > -
>> > - mb ();
>> > - value = addr[0];
>> > -
>> > - switch (value) {
>> > -
>> > - case (FPW) INTEL_MANUFACT:
>> > - info->flash_id = FLASH_MAN_INTEL;
>> > - break;
>> > -
>> > - default:
>> > - info->flash_id = FLASH_UNKNOWN;
>> > - info->sector_count = 0;
>> > - info->size = 0;
>> > - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
>> > - return (0); /* no or unknown flash
>> > */ - }
>> > -
>> > - mb ();
>> > - value = addr[1]; /* device ID */
>> > -
>> > - switch (value) {
>> > -
>> > - case (FPW) INTEL_ID_28F128J3A:
>> > - info->flash_id += FLASH_28F128J3A;
>> > - info->sector_count = 128;
>> > - info->size = 0x02000000;
>> > - break; /* => 16 MB */
>> > -
>> > - default:
>> > - info->flash_id = FLASH_UNKNOWN;
>> > - break;
>> > - }
>> > -
>> > - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
>> > - printf ("** ERROR: sector count %d > max (%d) **\n",
>> > - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
>> > - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
>> > - }
>> > -
>> > - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
>> > -
>> > - return (info->size);
>> > -}
>> > -
>> > -
>> > -/*----------------------------------------------------------------------
>> > - - */
>> > -
>> > -int flash_erase (flash_info_t *info, int s_first, int s_last)
>> > -{
>> > - int flag, prot, sect;
>> > - ulong type, start;
>> > - int rcode = 0;
>> > -
>> > - if ((s_first < 0) || (s_first > s_last)) {
>> > - if (info->flash_id == FLASH_UNKNOWN) {
>> > - printf ("- missing\n");
>> > - } else {
>> > - printf ("- no sectors to erase\n");
>> > - }
>> > - return 1;
>> > - }
>> > -
>> > - type = (info->flash_id & FLASH_VENDMASK);
>> > - if ((type != FLASH_MAN_INTEL)) {
>> > - printf ("Can't erase unknown flash type %08lx -
>> > aborted\n", - info->flash_id);
>> > - return 1;
>> > - }
>> > -
>> > - prot = 0;
>> > - for (sect = s_first; sect <= s_last; ++sect) {
>> > - if (info->protect[sect]) {
>> > - prot++;
>> > - }
>> > - }
>> > -
>> > - if (prot) {
>> > - printf ("- Warning: %d protected sectors will not be
>> > erased!\n", - prot);
>> > - } else {
>> > - printf ("\n");
>> > - }
>> > -
>> > - /* Disable interrupts which might cause a timeout here */
>> > - flag = disable_interrupts ();
>> > -
>> > - /* Start erase on unprotected sectors */
>> > - for (sect = s_first; sect <= s_last; sect++) {
>> > - if (info->protect[sect] == 0) { /* not protected */
>> > - FPWV *addr = (FPWV *) (info->start[sect]);
>> > - FPW status;
>> > -
>> > - printf ("Erasing sector %2d ... ", sect);
>> > -
>> > - /* arm simple, non interrupt dependent timer */
>> > - start = get_timer(0);
>> > -
>> > - *addr = (FPW) 0x00500050; /* clear status
>> > register */ - *addr = (FPW) 0x00200020; /*
>> > erase setup */ - *addr = (FPW) 0x00D000D0;
>> > /* erase confirm */ -
>> > - while (((status = *addr) & (FPW) 0x00800080) !=
>> > (FPW) 0x00800080) { - if (get_timer(start)
>> > > CONFIG_SYS_FLASH_ERASE_TOUT) { -
>> > printf ("Timeout\n");
>> > - *addr = (FPW) 0x00B000B0;
>> > /* suspend erase */ - *addr =
>> > (FPW) 0x00FF00FF; /* reset to read mode */ -
>> > rcode = 1;
>> > - break;
>> > - }
>> > - }
>> > -
>> > - *addr = 0x00500050; /* clear status register
>> > cmd. */ - *addr = 0x00FF00FF; /* resest to
>> > read mode */ -
>> > - printf (" done\n");
>> > - }
>> > - }
>> > - return rcode;
>> > -}
>> > -
>> > -/*----------------------------------------------------------------------
>> > - - * Copy memory to flash, returns:
>> > - * 0 - OK
>> > - * 1 - write timeout
>> > - * 2 - Flash not erased
>> > - * 4 - Flash not identified
>> > - */
>> > -
>> > -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
>> > -{
>> > - ulong cp, wp;
>> > - FPW data;
>> > - int count, i, l, rc, port_width;
>> > -
>> > - if (info->flash_id == FLASH_UNKNOWN) {
>> > - return 4;
>> > - }
>> > -/* get lower word aligned address */
>> > -#ifdef FLASH_PORT_WIDTH16
>> > - wp = (addr & ~1);
>> > - port_width = 2;
>> > -#else
>> > - wp = (addr & ~3);
>> > - port_width = 4;
>> > -#endif
>> > -
>> > - /*
>> > - * handle unaligned start bytes
>> > - */
>> > - if ((l = addr - wp) != 0) {
>> > - data = 0;
>> > - for (i = 0, cp = wp; i < l; ++i, ++cp) {
>> > - data = (data << 8) | (*(uchar *) cp);
>> > - }
>> > - for (; i < port_width && cnt > 0; ++i) {
>> > - data = (data << 8) | *src++;
>> > - --cnt;
>> > - ++cp;
>> > - }
>> > - for (; cnt == 0 && i < port_width; ++i, ++cp) {
>> > - data = (data << 8) | (*(uchar *) cp);
>> > - }
>> > -
>> > - if ((rc = write_data (info, wp, SWAP (data))) != 0) {
>> > - return (rc);
>> > - }
>> > - wp += port_width;
>> > - }
>> > -
>> > - /*
>> > - * handle word aligned part
>> > - */
>> > - count = 0;
>> > - while (cnt >= port_width) {
>> > - data = 0;
>> > - for (i = 0; i < port_width; ++i) {
>> > - data = (data << 8) | *src++;
>> > - }
>> > - if ((rc = write_data (info, wp, SWAP (data))) != 0) {
>> > - return (rc);
>> > - }
>> > - wp += port_width;
>> > - cnt -= port_width;
>> > - if (count++ > 0x800) {
>> > - spin_wheel ();
>> > - count = 0;
>> > - }
>> > - }
>> > -
>> > - if (cnt == 0) {
>> > - return (0);
>> > - }
>> > -
>> > - /*
>> > - * handle unaligned tail bytes
>> > - */
>> > - data = 0;
>> > - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
>> > - data = (data << 8) | *src++;
>> > - --cnt;
>> > - }
>> > - for (; i < port_width; ++i, ++cp) {
>> > - data = (data << 8) | (*(uchar *) cp);
>> > - }
>> > -
>> > - return (write_data (info, wp, SWAP (data)));
>> > -}
>> > -
>> > -/*----------------------------------------------------------------------
>> > - - * Write a word or halfword to Flash, returns:
>> > - * 0 - OK
>> > - * 1 - write timeout
>> > - * 2 - Flash not erased
>> > - */
>> > -static int write_data (flash_info_t *info, ulong dest, FPW data)
>> > -{
>> > - FPWV *addr = (FPWV *) dest;
>> > - ulong status;
>> > - int flag;
>> > - ulong start;
>> > -
>> > - /* Check if Flash is (sufficiently) erased */
>> > - if ((*addr & data) != data) {
>> > - printf ("not erased at %08lx (%lx)\n", (ulong) addr,
>> > *addr); - return (2);
>> > - }
>> > - /* Disable interrupts which might cause a timeout here */
>> > - flag = disable_interrupts ();
>> > -
>> > - *addr = (FPW) 0x00400040; /* write setup */
>> > - *addr = data;
>> > -
>> > - /* arm simple, non interrupt dependent timer */
>> > - start = get_timer(0);
>> > -
>> > - /* wait while polling the status register */
>> > - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080)
>> > { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
>> > - *addr = (FPW) 0x00FF00FF; /* restore read
>> > mode */ - return (1);
>> > - }
>> > - }
>> > -
>> > - *addr = (FPW) 0x00FF00FF; /* restore read mode */
>> > -
>> > - return (0);
>> > -}
>> > -
>> > -void inline spin_wheel (void)
>> > -{
>> > - static int p = 0;
>> > - static char w[] = "\\/-";
>> > -
>> > - printf ("\010%c", w[p]);
>> > - (++p == 3) ? (p = 0) : 0;
>> > -}
>> > diff --git a/boards.cfg b/boards.cfg
>> > index 7c63449..d65ca12 100644
>> > --- a/boards.cfg
>> > +++ b/boards.cfg
>> > @@ -216,7 +216,6 @@ actux3 arm ixp
>> > actux4 arm ixp
>> > dvlhost arm ixp
>> > balloon3 arm pxa
>> > -cerf250 arm pxa
>> > colibri_pxa270 arm pxa
>> > cradle arm pxa
>> > lubbock arm pxa
>> > diff --git a/doc/README.scrapyard b/doc/README.scrapyard
>> > index cb5e4bc..232cd68 100644
>> > --- a/doc/README.scrapyard
>> > +++ b/doc/README.scrapyard
>> > @@ -11,6 +11,7 @@ easily if here is something they might want to dig
>> > for...
>> >
>> > Board Arch CPU removed Commit last known
>> > maintainer/contact
>> > ========================================================================
>> > ===== +cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar
>> > <prak...@embedx.com> mpq101 powerpc mpc85xx - 2011-10-23 Alex
>> > Dubov <oa...@yahoo.com> ixdpg425 arm ixp 0ca8eb7 2011-09-22
>> > Stefan Roese <s...@denx.de> ixdp425 arm ixp 0ca8eb7 2011-09-22
>> > Kyle Harris <khar...@nexus-tech.net> diff --git
>> > a/include/configs/cerf250.h b/include/configs/cerf250.h deleted file
>> > mode 100644
>> > index 70427da..0000000
>> > --- a/include/configs/cerf250.h
>> > +++ /dev/null
>> > @@ -1,229 +0,0 @@
>> > -/*
>> > - * (C) Copyright 2002
>> > - * Kyle Harris, Nexus Technologies, Inc. khar...@nexus-tech.net
>> > - *
>> > - * (C) Copyright 2002
>> > - * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
>> > - * Marius Groeger <mgroe...@sysgo.de>
>> > - *
>> > - * Configuation settings for the CERF250 board.
>> > - *
>> > - * See file CREDITS for list of people who contributed to this
>> > - * project.
>> > - *
>> > - * This program is free software; you can redistribute it and/or
>> > - * modify it under the terms of the GNU General Public License as
>> > - * published by the Free Software Foundation; either version 2 of
>> > - * the License, or (at your option) any later version.
>> > - *
>> > - * This program is distributed in the hope that it will be useful,
>> > - * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> > - * GNU General Public License for more details.
>> > - *
>> > - * You should have received a copy of the GNU General Public License
>> > - * along with this program; if not, write to the Free Software
>> > - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> > - * MA 02111-1307 USA
>> > - */
>> > -
>> > -#ifndef __CONFIG_H
>> > -#define __CONFIG_H
>> > -
>> > -/*
>> > - * High Level Configuration Options
>> > - * (easy to change)
>> > - */
>> > -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
>> > -#define CONFIG_CERF250 1 /* on Cerf PXA Board */
>> > -#define CONFIG_BOARD_LATE_INIT
>> > -#define CONFIG_BAUDRATE 38400
>> > -#define CONFIG_SYS_TEXT_BASE 0x0
>> > -
>> > -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
>> > -
>> > -/* we will never enable dcache, because we have to setup MMU first */
>> > -#define CONFIG_SYS_DCACHE_OFF
>> > -
>> > -/*
>> > - * Size of malloc() pool
>> > - */
>> > -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
>> > -
>> > -/*
>> > - * Hardware drivers
>> > - */
>> > -#define CONFIG_SMC91111
>> > -#define CONFIG_SMC91111_BASE 0x04000300
>> > -#define CONFIG_SMC_USE_32_BIT
>> > -
>> > -/*
>> > - * select serial console configuration
>> > - */
>> > -#define CONFIG_PXA_SERIAL
>> > -#define CONFIG_FFUART 1 /* we use FFUART on CERF PXA */
>> > -
>> > -/* allow to overwrite serial and ethaddr */
>> > -#define CONFIG_ENV_OVERWRITE
>> > -
>> > -/*
>> > - * BOOTP options
>> > - */
>> > -#define CONFIG_BOOTP_BOOTFILESIZE
>> > -#define CONFIG_BOOTP_BOOTPATH
>> > -#define CONFIG_BOOTP_GATEWAY
>> > -#define CONFIG_BOOTP_HOSTNAME
>> > -
>> > -
>> > -/*
>> > - * Command line configuration.
>> > - */
>> > -#include <config_cmd_default.h>
>> > -
>> > -
>> > -#define CONFIG_BOOTDELAY 3
>> > -#define CONFIG_ETHADDR 00:D0:CA:F1:3C:D2
>> > -#define CONFIG_NETMASK 255.255.255.0
>> > -#define CONFIG_IPADDR 192.168.0.5
>> > -#define CONFIG_SERVERIP 192.168.0.2
>> > -#define CONFIG_BOOTCOMMAND "bootm 0xC0000"
>> > -#define CONFIG_BOOTARGS "root=/dev/mtdblock3
>> > rootfstype=jffs2 console=ttyS0,38400" -#define CONFIG_CMDLINE_TAG
>> > -
>> > -#if defined(CONFIG_CMD_KGDB)
>> > -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port
>> > */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port
>> > to use */ -#endif
>> > -
>> > -/*
>> > - * Miscellaneous configurable options
>> > - */
>> > -#define CONFIG_SYS_HUSH_PARSER 1
>> > -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
>> > -
>> > -#define CONFIG_SYS_LONGHELP /* undef
>> > to save memory */ -#ifdef CONFIG_SYS_HUSH_PARSER
>> > -#define CONFIG_SYS_PROMPT "uboot$ " /*
>> > Monitor Command Prompt */ -#else
>> > -#define CONFIG_SYS_PROMPT "=> " /*
>> > Monitor Command Prompt */ -#endif
>> > -#define CONFIG_SYS_CBSIZE 256
>> > /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE
>> > (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -
>> > /*
>> > Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16
>> > /* max number of command args */ -#define
>> > CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument
>> > Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1
>> > -
>> > -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works
>> > on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4
>> > ... 8 MB in DRAM */ -
>> > -#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load
>> > address */ -
>> > -#define CONFIG_SYS_HZ 1000
>> > -#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock
>> > to 400/200/100 MHz */ -
>> > -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600,
>> > 115200 } -
>> > -
>> > -/*
>> > - * Stack sizes
>> > - *
>> > - * The stack sizes are set up in start.S using the settings below
>> > - */
>> > -#define CONFIG_STACKSIZE (128*1024) /* regular stack
>> > */ -#ifdef CONFIG_USE_IRQ
>> > -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
>> > -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
>> > -#endif
>> > -
>> > -/*
>> > - * Physical Memory Map
>> > - */
>> > -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank
>> > of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /*
>> > SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000
>> > /* 64 MB */ -
>> > -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1
>> > */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank
>> > #2 */ -#define PHYS_FLASH_SIZE 0x02000000 /*
>> > 32 MB */ -#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32
>> > MB Banks */ -#define PHYS_FLASH_SECT_SIZE 0x00040000 /*
>> > 256 KB sectors (x2) */ -
>> > -#define CONFIG_SYS_DRAM_BASE 0xa0000000
>> > -#define CONFIG_SYS_DRAM_SIZE 0x04000000
>> > -
>> > -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
>> > -
>> > -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
>> > -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE
>> > + PHYS_SDRAM_1) -
>> > -/*
>> > - * GPIO settings
>> > - */
>> > -
>> > -
>> > -#define CONFIG_SYS_GPSR0_VAL 0x00408030
>> > -#define CONFIG_SYS_GPSR1_VAL 0x00BFA882
>> > -#define CONFIG_SYS_GPSR2_VAL 0x0001C000
>> > -#define CONFIG_SYS_GPCR0_VAL 0xC0031100
>> > -#define CONFIG_SYS_GPCR1_VAL 0xFC400300
>> > -#define CONFIG_SYS_GPCR2_VAL 0x00003FFF
>> > -#define CONFIG_SYS_GPDR0_VAL 0xC0439330
>> > -#define CONFIG_SYS_GPDR1_VAL 0xFCFFAB82
>> > -#define CONFIG_SYS_GPDR2_VAL 0x0001FFFF
>> > -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000
>> > -#define CONFIG_SYS_GAFR0_U_VAL 0xA5000010
>> > -#define CONFIG_SYS_GAFR1_L_VAL 0x60008018
>> > -#define CONFIG_SYS_GAFR1_U_VAL 0xAAA5AAAA
>> > -#define CONFIG_SYS_GAFR2_L_VAL 0xAAA0000A
>> > -#define CONFIG_SYS_GAFR2_U_VAL 0x00000002
>> > -
>> > -#define CONFIG_SYS_PSSR_VAL 0x20
>> > -
>> > -#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10
>> > -#define CONFIG_SYS_CKEN 0x0
>> > -
>> > -/*
>> > - * Memory settings
>> > - */
>> > -#define CONFIG_SYS_MSC0_VAL 0x12447FF0
>> > -#define CONFIG_SYS_MSC1_VAL 0x12BC5554
>> > -#define CONFIG_SYS_MSC2_VAL 0x7FF97FF1
>> > -#define CONFIG_SYS_MDCNFG_VAL 0x00001AC9
>> > -#define CONFIG_SYS_MDREFR_VAL 0x03CDC017
>> > -#define CONFIG_SYS_MDMRS_VAL 0x00000000
>> > -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
>> > -#define CONFIG_SYS_SXCNFG_VAL 0x00000000
>> > -
>> > -/*
>> > - * PCMCIA and CF Interfaces
>> > - */
>> > -#define CONFIG_SYS_MECR_VAL 0x00000000
>> > -#define CONFIG_SYS_MCMEM0_VAL 0x00010504
>> > -#define CONFIG_SYS_MCMEM1_VAL 0x00010504
>> > -#define CONFIG_SYS_MCATT0_VAL 0x00010504
>> > -#define CONFIG_SYS_MCATT1_VAL 0x00010504
>> > -#define CONFIG_SYS_MCIO0_VAL 0x00004715
>> > -#define CONFIG_SYS_MCIO1_VAL 0x00004715
>> > -
>> > -#define _LED 0x08000010 /*check this */
>> > -#define LED_BLANK 0x08000040
>> > -#define LED_GPIO 0x10
>> > -
>> > -/*
>> > - * FLASH and environment organization
>> > - */
>> > -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory
>> > banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /*
>> > max number of sectors on one chip */ -
>> > -/* timeout values are in ticks */
>> > -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for
>> > Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT
>> > (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */ -
>> > -#define CONFIG_SYS_MONITOR_LEN 0x40000 /* 256 KiB */
>> > -#define CONFIG_ENV_IS_IN_FLASH 1
>> > -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 +
>> > CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x40000
>> > /* Total Size of Environment Sector */ -
>> > -
>> > -#endif /* __CONFIG_H */
>> > --
>> > 1.7.7.1
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
