Dear Kumar Gala, In message <alpine.lfd.2.00.1111290921110.25...@right.am.freescale.net> you wrote: > The following changes since commit a63d9652757605ec5f7104addc5d38bf10ba8671: > > menu.c: use puts() instead of printf() where possible (2011-11-28 20:19:41 > +0100) > > are available in the git repository at: > git://git.denx.de/u-boot-mpc85xx.git master > > Ira W. Snyder (3): > mpc8xxx: update module_type values from JEDEC DDR3 SPD Specification > mpc85xx: support board-specific reset function > mpc85xx: support for Freescale COM Express P2020 > > Jia Hongtao (1): > powerpc/85xx: fixup flexcan device tree clock-frequency > > Kumar Gala (2): > powerpc/85xx: Add workaround for erratum CPU-A003999 > arch/powerpc/cpu/mpc8xxx/ddr/interactive.c: Fix GCC 4.6 build warning > > Shengzhou Liu (1): > powerpc/p3060qds: Add board related support for P3060QDS platform > > Timur Tabi (4): > powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h > powerpc/85xx: always implement the work-around for Erratum SATA_A001 > powerpc/85xx: clean up and document the QE/FMAN microcode macros > powerpc/85xx: verify the localbus device tree address before booting > the OS > > York Sun (1): > powerpc/85xx: Add workaround for erratum A-003474 > > MAINTAINERS | 4 + > README | 38 ++ > arch/powerpc/cpu/mpc85xx/cmd_errata.c | 6 + > arch/powerpc/cpu/mpc85xx/cpu.c | 17 +- > arch/powerpc/cpu/mpc85xx/cpu_init.c | 49 ++- > arch/powerpc/cpu/mpc85xx/ddr-gen3.c | 5 + > arch/powerpc/cpu/mpc85xx/fdt.c | 63 ++- > arch/powerpc/cpu/mpc85xx/release.S | 6 + > arch/powerpc/cpu/mpc85xx/start.S | 6 + > arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c | 7 + > arch/powerpc/cpu/mpc8xxx/ddr/interactive.c | 3 +- > arch/powerpc/include/asm/config_mpc85xx.h | 19 + > arch/powerpc/include/asm/immap_85xx.h | 1 + > board/freescale/common/Makefile | 3 + > board/freescale/common/ics307_clk.c | 21 +- > board/freescale/common/qixis.c | 151 ++++++ > board/freescale/common/qixis.h | 101 ++++ > board/freescale/p2020come/Makefile | 46 ++ > board/freescale/p2020come/ddr.c | 45 ++ > board/freescale/p2020come/law.c | 39 ++ > board/freescale/p2020come/p2020come.c | 287 +++++++++++ > board/freescale/p2020come/tlb.c | 99 ++++ > board/freescale/p3060qds/Makefile | 54 +++ > board/freescale/p3060qds/ddr.c | 248 ++++++++++ > board/freescale/p3060qds/eth.c | 482 +++++++++++++++++++ > board/freescale/p3060qds/fixed_ddr.c | 214 +++++++++ > board/freescale/p3060qds/p3060qds.c | 341 ++++++++++++++ > board/freescale/p3060qds/p3060qds.h | 30 ++ > board/freescale/p3060qds/p3060qds_qixis.h | 74 +++ > boards.cfg | 5 + > doc/README.p3060qds | 111 +++++ > drivers/block/fsl_sata.c | 21 - > drivers/block/fsl_sata.h | 1 + > drivers/net/fm/fm.c | 32 +- > drivers/qe/qe.c | 4 +- > include/configs/MPC8569MDS.h | 3 +- > include/configs/P1022DS.h | 1 - > include/configs/P1023RDS.h | 10 +- > include/configs/P2020COME.h | 576 > +++++++++++++++++++++++ > include/configs/P2041RDB.h | 21 +- > include/configs/P3041DS.h | 1 - > include/configs/P3060QDS.h | 48 ++ > include/configs/P5020DS.h | 1 - > include/configs/corenet_ds.h | 22 +- > include/configs/p1_p2_rdb_pc.h | 5 +- > include/ddr_spd.h | 7 + > 46 files changed, 3231 insertions(+), 97 deletions(-) > create mode 100644 board/freescale/common/qixis.c > create mode 100644 board/freescale/common/qixis.h > create mode 100644 board/freescale/p2020come/Makefile > create mode 100644 board/freescale/p2020come/ddr.c > create mode 100644 board/freescale/p2020come/law.c > create mode 100644 board/freescale/p2020come/p2020come.c > create mode 100644 board/freescale/p2020come/tlb.c > create mode 100644 board/freescale/p3060qds/Makefile > create mode 100644 board/freescale/p3060qds/ddr.c > create mode 100644 board/freescale/p3060qds/eth.c > create mode 100644 board/freescale/p3060qds/fixed_ddr.c > create mode 100644 board/freescale/p3060qds/p3060qds.c > create mode 100644 board/freescale/p3060qds/p3060qds.h > create mode 100644 board/freescale/p3060qds/p3060qds_qixis.h > create mode 100644 doc/README.p3060qds > create mode 100644 include/configs/P2020COME.h > create mode 100644 include/configs/P3060QDS.h
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Here is an Appalachian version of management's answer to those who are concerned with the fate of the project: "Don't worry about the mule. Just load the wagon." - Mike Dennison's hillbilly uncle _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot