Fix warnings for both cases:

definded CONFIG_SYS_NAND_HW_ECC_OOBFIRST:
nand_spl_simple.c: In function 'nand_read_page':
nand_spl_simple.c:156:6: warning: variable 'stat' set but not used
[-Wunused-but-set-variable]

not definded CONFIG_SYS_NAND_HW_ECC_OOBFIRST:
nand_spl_simple.c: In function 'nand_read_page':
nand_spl_simple.c:196:6: warning: variable 'stat' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <ag...@denx.de>
Cc: Heiko Schocher <h...@denx.de>
Cc: Scott Wood <scottw...@freescale.com>
---
 drivers/mtd/nand/nand_spl_simple.c |    6 ++----
 1 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/nand_spl_simple.c 
b/drivers/mtd/nand/nand_spl_simple.c
index ed821f2..7eb08a3 100644
--- a/drivers/mtd/nand/nand_spl_simple.c
+++ b/drivers/mtd/nand/nand_spl_simple.c
@@ -153,7 +153,6 @@ static int nand_read_page(int block, int page, uchar *dst)
        int eccbytes = CONFIG_SYS_NAND_ECCBYTES;
        int eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
        uint8_t *p = dst;
-       int stat;
 
        /*
         * No malloc available for now, just use some temporary locations
@@ -176,7 +175,7 @@ static int nand_read_page(int block, int page, uchar *dst)
                this->ecc.hwctl(&mtd, NAND_ECC_READ);
                this->read_buf(&mtd, p, eccsize);
                this->ecc.calculate(&mtd, p, &ecc_calc[i]);
-               stat = this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]);
+               this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]);
        }
 
        return 0;
@@ -193,7 +192,6 @@ static int nand_read_page(int block, int page, void *dst)
        int eccbytes = CONFIG_SYS_NAND_ECCBYTES;
        int eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
        uint8_t *p = dst;
-       int stat;
 
        nand_command(block, page, 0, NAND_CMD_READ0);
 
@@ -224,7 +222,7 @@ static int nand_read_page(int block, int page, void *dst)
                 * from correct_data(). We just hope that all possible errors
                 * are corrected by this routine.
                 */
-               stat = this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]);
+               this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]);
        }
 
        return 0;
-- 
1.7.6.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to