Hi Tom,
Le 29/11/2011 23:53, Tom Rini a écrit :
The following changes since commit f2695a272849764cda09bcce6f86d03105e9e46d:
Marek Vasut (1):
PXA: Drop XM250 board
are available in the git repository at:
git://git.denx.de/u-boot-ti.git master
Anatolij Gustschin (1):
ARM: davinci_dm6467Tevm: Fix build breakage
Aneesh V (13):
armv7: disable L2 cache in cleanup_before_linux()
armv7: include armv7/cpu.c in SPL build
armv7: setup vector
start.S: remove omap3 specific code from start.S
omap: Improve PLL parameter calculation tool
omap4: ttyO2 instead of ttyS2 in default bootargs
omap: fix cache line size for omap3/omap4 boards
omap4460: fix TPS initialization
omap: remove I2C from SPL
omap4: emif: fix error in driver
omap4460: add ES1.1 identification
omap4+: streamline CONFIG_SYS_TEXT_BASE and other SDRAM addresses
omap4: fix IO setting
Christian Riesch (8):
arm, davinci: Move pinmux functions from board to arch tree
arm, hawkboard: Remove obsolete struct pinmux_config i2c_pins
arm, da850evm: Do pinmux configuration for EMAC together with
other pinmuxes
arm, da850: Add pinmux configurations to the arch tree
arm, da850evm: Use the pinmux configurations defined in the arch tree
arm, hawkboard: Use the pinmux configurations defined in the arch tree
arm, davinci: Remove duplication of pinmux configuration code
arm: printf() is not available in some SPL configurations
Heiko Schocher (6):
arm, arm926ejs: always do cpu critical inits
arm, davinci: move davinci_rtc struct to hardware.h
arm, davinci, da850: add uart1 tx rx pinmux config
arm, board/davinci/common/misc.c: Codingstyle cleanup
arm, davinci: move misc function in arch tree
arm, davinci: add support for am1808 based enbw_cmc board
Ilya Yanok (10):
davinci_emac: move arch-independent defines to separate header
davinci_emac: use internal addresses in buffer descriptors
davinci_emac: conditionally compile specific PHY support
arm926ejs: add noop implementation for dcache ops
davinci_emac: fix for running with dcache enabled
davinci_emac: hardcode 100Mbps for AM35xx and RMII
AM35xx: add EMAC support
AM3517: move AM3517 specific mux defines to generic header
nand_spl_simple: add support for software ECC
omap_gpmc: use SOFTECC in SPL if it's enabled
Koen Kooi (1):
BeagleBoard: config: Really switch to ttyO2
Prabhakar Lad (1):
ARM: davici_emac: Fix condition for number of phy detects
Thomas Weber (3):
ARM: OMAP3: Remove unused define CONFIG_OMAP3430
ARM: OMAP3: Remove unused define SDRC_R_C_B
ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused
Tom Rini (15):
omap3: mem: Comment enable_gpmc_cs_config more
OMAP3: Update SDRC dram_init to always call make_cs1_contiguous()
OMAP3: Add a helper function to set timings in SDRC
OMAP3: Change mem_ok to clear again after reading back
OMAP3: Remove get_mem_type prototype
omap3: mem: Add MCFG helper macro
OMAP3: Add optimal SDRC autorefresh control values
OMAP3: Suffix all Micron memory timing parts with their speed
OMAP3 SPL: Rework memory initalization and devkit8000 support
OMAP3 SPL: Add identify_nand_chip function
OMAP3: Add SPL support to Beagleboard
OMAP3: Add SPL support to omap3_evm
AM3517: Add SPL support
AM3517 CraneBoard: Add SPL support
OMAP3: Add SPL_BOARD_INIT hook
Applied to u-boot-arm/master, thanks.
Amicalement,
--
Albert.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot