Hey all,
The following series enhances AM3517EVM support as follows:
- Make use of uEnv.txt on MMC, when possible (#4).
- Add build targets for supporting NOR flash and booting from NOR flash
(#5).
* As the commit messages say, this requires hardware modifications for
NOR to be seen at all, which is why this isn't part of the standard
config.
- Enable ethernet (#7)
While enabling ethernet for the EVM, also enable it on Crane (#8).
To do all of this we needed the following general bugfixes or
enhancements:
#1: SYSBOOT_MASK wasn't including the peripheral/memory flag.
#2: gpmc_init had an extra delay that we didn't need.
#3: gpmc_init needs to know what to do (and not do) when NOR is present.
#6: We need to read the ethaddr for the EMAC and put that into the
env when possible.
Patch #5 is large but it's a lot of shuffling of the contents
around in order to be able to say "setup this way for NOR" and "setup
this way for NAND".
--
Tom
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
