Hi Marek, On 12/07/11 01:49, Marek Vasut wrote: >> Although it is a single patch, I felt that a cover letter will >> definetly not hurt here, also the patch version history is so big, so >> I decided to move it here. >> >> The ULPI (UTMI Low Pin (count) Interface) PHYs are widely used on >> variety of boards. This requires a generic architecture independant >> implementation which can be reused and will eliminate the need for >> direct write of arbitrary values to the ULPI transciever. >> Although, the generic implementation can be reused on any architecture, >> the access to ULPI PHY must be done in a platform specific way. >> The platform specific way is in majority of case called a viewport. >> Also, the ULPI specification defines a hybrid aproach for managing the >> ULPI PHY. That is, the PHY must be managed through both the PHY registers >> and control lines. >> >> The proposed patch provides a partial implementation of the ULPI >> specification, which should be enough for boot loader use cases, >> and a viewport implementation for Chipidea/ARC based controllers, >> which, AFAIK, are used on imx and tegra SoCs. >> >> It is based on the Wolfgang's master branch (4 Dec 2012), >> compile tested and checkpatch clean. >> >> What is still missing, IMO: >> - documentation for the CONFIG_* macros (I can add it in a separate > patch) >> - a way to make most of the initialization in one ulpi_init() call >> - viewport extension to be able to implement resume, >> reset and disabling the serial mode >> >> The change log: >> Changes for v2: >> - make code EHCI-independent >> - use udelay() in waiting loop >> - mark static functions as static >> - naming changes >> Changes for v3: >> - merge with patch ulpi: add generic ULPI support header file >> - rewrite ULPI interface in more functionality-oriented way >> Changes for v4: >> - add error-checking >> - add waiting for completion into ulpi_reset() function >> Changes for v5: >> - CodingStyle changes >> - add comments >> - simplify implemenation of the ULPI interface functions >> Changes for v6: >> - cleanup function ulpi_drive_vbus() >> Changes for v7: >> - ulpi-viewport.c: >> - reorder bit definitions >> - split ulpi_request() to two functions >> - reuse ulpi_wakeup() from ulpi_request() >> to remove duplicated calls from ulpi_{read|write}() >> - inline ulpi_*_mask as it is simple and used only once >> - ulpi.c: >> - move several defines into c file >> - rework all the functions to propagate error values >> - move function description comments into ulpi.h >> along with declarations >> - check arguments validity (as suggested by Simon) >> - fix cases when using the *_set register, >> bits cannot be cleared >> - shorten several arguments names (e.g. ulpi_set_vbus()) >> - add ability to disable VBUS >> - clean up ulpi_set_pd() >> - add ability to enter the serial mode >> - add verbosity in error cases >> - remove ulpi_resume() as it were wrong and >> must be implemented in a viewport specific way >> - rework ulpi_reset() as it must be implemented in a >> viewport specific way, but provide kind of generic >> implementation which should work in most of the cases >> - ulpi.h: >> - add default timeout value >> - remove unused defines >> - move several defines inside c files >> - add description for each function >> - move the API declaration to the top of the header file >> >> Jana Rapava (1): >> USB: Add generic ULPI layer and a viewport >> >> Makefile | 1 + >> drivers/usb/ulpi/Makefile | 44 ++++++ >> drivers/usb/ulpi/ulpi-viewport.c | 118 +++++++++++++++ >> drivers/usb/ulpi/ulpi.c | 227 +++++++++++++++++++++++++++++ >> include/usb/ulpi.h | 298 >> ++++++++++++++++++++++++++++++++++++++ 5 files changed, 688 insertions(+), >> 0 deletions(-) >> create mode 100644 drivers/usb/ulpi/Makefile >> create mode 100644 drivers/usb/ulpi/ulpi-viewport.c >> create mode 100644 drivers/usb/ulpi/ulpi.c >> create mode 100644 include/usb/ulpi.h > > Igor, please add Cc annotations to this patch too.
Well, I indeed forgot this, but I've send a forward of this email to everybody supposed to be in Cc. Adding Cc once again... -- Regards, Igor. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot