From: Wolfgang Grandegger <w...@denx.de>
Signed-off-by: Wolfgang Grandegger <w...@denx.de>
Cc: Stefano Babic <sba...@denx.de>
Cc: Remy Bohmer <li...@bohmer.net>
Cc: Wolfgang Grandegger <w...@denx.de>
Cc: Jason Liu <r64...@freescale.com>
---
board/freescale/mx51evk/mx51evk.c | 62 +++++++++++++++++++++++++++++++++++++
include/configs/mx51evk.h | 13 ++++++++
2 files changed, 75 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx51evk/mx51evk.c
b/board/freescale/mx51evk/mx51evk.c
index 37e6e4d..991bae2 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -35,6 +35,7 @@
#include <pmic.h>
#include <fsl_pmic.h>
#include <mc13892.h>
+#include <usb/ehci-fsl.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -172,6 +173,64 @@ static void setup_iomux_spi(void)
}
#endif
+#ifdef CONFIG_USB_EHCI_MX5
+#define MX51EVK_USBH1_HUB_RST IOMUX_TO_GPIO(MX51_PIN_GPIO1_7) /* GPIO1_7 */
+#define MX51EVK_USBH1_STP IOMUX_TO_GPIO(MX51_PIN_USBH1_STP) /* GPIO1_27 */
+#define MX51EVK_USB_CLK_EN_B IOMUX_TO_GPIO(MX51_PIN_EIM_D18) /* GPIO2_1 */
+#define MX51EVK_USB_PHY_RESET IOMUX_TO_GPIO(MX51_PIN_EIM_D21) /* GPIO2_5 */
+
+#define USBH1_PAD (PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | \
+ PAD_CTL_100K_PU | PAD_CTL_PUE_PULL | \
+ PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE)
+#define GPIO_PAD (PAD_CTL_DRV_HIGH | PAD_CTL_PKE_ENABLE | \
+ PAD_CTL_SRE_FAST)
+#define NO_PAD (1 << 16)
+
+static void setup_usb_h1(void)
+{
+ setup_iomux_usb_h1();
+
+ /* GPIO_1_7 for USBH1 hub reset */
+ mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_GPIO1_7, NO_PAD);
+
+ /* GPIO_2_1 */
+ mxc_request_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT1);
+ mxc_iomux_set_pad(MX51_PIN_EIM_D17, GPIO_PAD);
+
+ /* GPIO_2_5 for USB PHY reset */
+ mxc_request_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT1);
+ mxc_iomux_set_pad(MX51_PIN_EIM_D21, GPIO_PAD);
+}
+
+void board_ehci_hcd_init(int port)
+{
+ /* Set USBH1_STP to GPIO and toggle it */
+ mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_GPIO);
+ mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD);
+
+ gpio_direction_output(MX51EVK_USBH1_STP, 0);
+ gpio_direction_output(MX51EVK_USB_PHY_RESET, 0);
+ mdelay(10);
+ gpio_set_value(MX51EVK_USBH1_STP, 1);
+
+ /* Set back USBH1_STP to be function */
+ mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD);
+
+ /* De-assert USB PHY RESETB */
+ gpio_set_value(MX51EVK_USB_PHY_RESET, 1);
+
+ /* Drive USB_CLK_EN_B line low */
+ gpio_direction_output(MX51EVK_USB_CLK_EN_B, 0);
+
+ /* Reset USB hub */
+ gpio_direction_output(MX51EVK_USBH1_HUB_RST, 0);
+ mdelay(2);
+ gpio_set_value(MX51EVK_USBH1_HUB_RST, 1);
+}
+#endif
+
static void power_init(void)
{
unsigned int val;
@@ -391,6 +450,9 @@ int board_early_init_f(void)
{
setup_iomux_uart();
setup_iomux_fec();
+#ifdef CONFIG_USB_EHCI_MX5
+ setup_usb_h1();
+#endif
return 0;
}
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 7c7544f..18f1ebd 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -110,6 +110,19 @@
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
+/* USB Configs */
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX5
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_MXC_USB_PORT 1
+#define CONFIG_MXC_USB_PORTSC PORT_PTS_ULPI
+#define CONFIG_MXC_USB_FLAGS MXC_EHCI_POWER_PINS_ENABLED
+
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
--
1.7.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
