On Tegra2, card-detection is implemented by passing the card-detection
GPIOs to the MMC driver at initialization time. Instead of implementing
the board_mmc_getcd() function, use the card-detect hook and allow
boards to override it by providing their own board_mmc_getcd()
implementation.
Signed-off-by: Thierry Reding <thierry.red...@avionic-design.de>
---
drivers/mmc/tegra2_mmc.c | 28 +++++++++++++---------------
1 files changed, 13 insertions(+), 15 deletions(-)
diff --git a/drivers/mmc/tegra2_mmc.c b/drivers/mmc/tegra2_mmc.c
index fe562ed..5b4c9f6 100644
--- a/drivers/mmc/tegra2_mmc.c
+++ b/drivers/mmc/tegra2_mmc.c
@@ -474,6 +474,18 @@ static int mmc_core_init(struct mmc *mmc)
return 0;
}
+int tegra2_mmc_getcd(struct mmc *mmc)
+{
+ struct mmc_host *host = (struct mmc_host *)mmc->priv;
+
+ debug("tegra2_mmc_getcd called\n");
+
+ if (host->cd_gpio >= 0)
+ return !gpio_get_value(host->cd_gpio);
+
+ return 1;
+}
+
int tegra2_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)
{
struct mmc_host *host;
@@ -512,6 +524,7 @@ int tegra2_mmc_init(int dev_index, int bus_width, int
pwr_gpio, int cd_gpio)
mmc->send_cmd = mmc_send_cmd;
mmc->set_ios = mmc_set_ios;
mmc->init = mmc_core_init;
+ mmc->getcd = tegra2_mmc_getcd;
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
if (bus_width == 8)
@@ -535,18 +548,3 @@ int tegra2_mmc_init(int dev_index, int bus_width, int
pwr_gpio, int cd_gpio)
return 0;
}
-
-/* this is a weak define that we are overriding */
-int board_mmc_getcd(u8 *cd, struct mmc *mmc)
-{
- struct mmc_host *host = (struct mmc_host *)mmc->priv;
-
- debug("board_mmc_getcd called\n");
-
- if (host->cd_gpio >= 0)
- *cd = !gpio_get_value(host->cd_gpio);
- else
- *cd = 1;
-
- return 0;
-}
--
1.7.8
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
