Hi Tom,
Le 08/12/2011 17:48, Tom Warren a écrit :
Albert,
Here's my rebased pull request. Thanks for your patience!
The following changes since commit 15422043c4a213dc5d7d59a337be1ab34c9b2e7f:
davinci: Remove unwanted memsize.c from hawkboard's nand spl build
(2011-12-06 23:59:41 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-tegra.git ..BRANCH.NOT.VERIFIED..
Simon Glass (9):
tegra2: Add arch_cpu_init() to fire up Cortex-A9
tegra2: Simplify tegra_start() boot path
arm: Move CP15 init out of cpu_init_crit()
tegra2: Enable instruction cache
tegra2: Remove unneeded boot code
tegra2: Remove unneeded config option
tegra2: Remove unused low-level Tegra2 UART code
tegra2: Remove unneeded 'dynamic ram size' message
tegra2: Don't use board pointer before it is set up
Stephen Warren (4):
tegra2: Move board_mmc_init into board files
tegra2: Modify MMC driver to handle power and cd GPIOs
tegra2: Add support for Ventana
tegra2: Use new GPIO APIs in gpio_config_uart()
MAINTAINERS | 5 +
arch/arm/cpu/armv7/start.S | 36 +++---
arch/arm/cpu/armv7/tegra2/Makefile | 5 +
arch/arm/cpu/armv7/tegra2/ap20.c | 54 +++++----
arch/arm/cpu/armv7/tegra2/ap20.h | 10 +-
arch/arm/cpu/armv7/tegra2/board.c | 35 +++---
arch/arm/cpu/armv7/tegra2/config.mk | 7 +-
arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 118 --------------------
arch/arm/include/asm/u-boot-arm.h | 3 +
board/nvidia/common/board.c | 58 +---------
board/nvidia/common/board.h | 4 +-
board/nvidia/harmony/harmony.c | 57 ++++++++--
board/nvidia/seaboard/seaboard.c | 81 ++++++++------
board/nvidia/ventana/Makefile | 49 ++++++++
boards.cfg | 1 +
drivers/gpio/tegra2_gpio.c | 6 +-
drivers/mmc/tegra2_mmc.c | 42 ++++++-
drivers/mmc/tegra2_mmc.h | 4 +-
drivers/serial/Makefile | 1 -
drivers/serial/serial_tegra2.c | 77 -------------
include/configs/tegra2-common.h | 3 +-
.../serial_tegra2.h => include/configs/ventana.h | 34 +++++-
22 files changed, 308 insertions(+), 382 deletions(-)
create mode 100644 board/nvidia/ventana/Makefile
delete mode 100644 drivers/serial/serial_tegra2.c
rename drivers/serial/serial_tegra2.h => include/configs/ventana.h (51%)
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot