Hi Tom, On 13.12.2011 22:52, Tom Rini wrote: > On Mon, Dec 12, 2011 at 4:15 PM, Ilya Yanok <ya...@emcraft.com> wrote: >> This patch adds support for the HTKW mcx AM3517-based board. >> Serial, Ethernet, NAND, MMC, RTC, EHCI USB host and both >> NAND and MMC SPLs are supported. >> >> Requires updated mach-types file. > > Just define the MACH_ID locally for now so it builds still please.
Ok, will do. > Also, some problems: > >> +#if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD) >> +int board_mmc_init(bd_t *bis) >> +{ >> + omap_mmc_init(0); >> + return 0; >> +} >> +#endif > > That should just be return omap_mmc_init(0); Surely. I've been told about this one already but forgot to fix it. Sorry. > [snip to config file] >> +#define CONFIG_SYS_TEXT_BASE 0x80008000 > [snip] >> +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address >> 0x60000 */ >> +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 >> +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" > > You're able to have CONFIG_SYS_TEXT_BASE that low and not have the > corruption problem devkit8000 had? Hm. What corruption problem? >> +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x60000 > > IIRC you don't need this define since this SPL says you write > u-boot.img to NAND not u-boot.bin Right. Regards, Ilya. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot