On 12/13/2011 08:33 PM, Stefano Babic wrote:
Currently nand_spl_simple puts it's temp data at 0x10000 offset in SDRAM
which is likely to contain already loaded data.
The patch saves the oob data and the ecc on the stack replacing
the fixed address in RAM.
Signed-off-by: Stefano Babic<sba...@denx.de>
CC: Ilya Yanok<ya...@emcraft.com>
CC: Scott Wood<scottw...@freescale.com>
CC: Tom Rini<tom.r...@gmail.com>
CC: Simon Schwarz<simonschwarz...@googlemail.com>
CC: Wolfgang Denk<w...@denx.de>
---
V4:
- Drop SYS_ from local defines (Wolfgang Denk, Scott Wood)
- drop parenthesis around defines (Scott Wood)
V3:
- use local defines for CONFIG_SYS_NAND_ECCSTEPS and
CONFIG_SYS_NAND_ECCTOTAL (Tom Rini)
- drop CONFIG_SYS_NAND_ECCSTEPS from board config files
V2:
- CONFIG_SYS_NAND_ECCTOTAL can always be computed (Ilya Yanok)
- drop all CONFIG_SYS_NAND_ECCTOTAL in arm boards using nand_simple.c
[SNIP]
Hi Stefano,
on which repo is this patch based? I tried to test it on u-boot but the
patch does not apply.
Regards
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
