Let imx_get_mac_from_fuse function be a common function, so that other
mx28 boards can reuse it.
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
Changes since v4:
- No changes
Change since v3:
- Add a note about the first two MAC addresses being from Freescale vendor.
arch/arm/cpu/arm926ejs/mx28/mx28.c | 41 ++++++++++++++++++++++++++++
arch/arm/include/asm/arch-mx28/sys_proto.h | 2 +
board/denx/m28evk/m28evk.c | 35 -----------------------
3 files changed, 43 insertions(+), 35 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c
b/arch/arm/cpu/arm926ejs/mx28/mx28.c
index 088c019..d82bb01 100644
--- a/arch/arm/cpu/arm926ejs/mx28/mx28.c
+++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
@@ -214,6 +214,47 @@ int cpu_eth_init(bd_t *bis)
}
#endif
+#ifdef CONFIG_MX28_FEC_MAC_IN_OCOTP
+
+#define MXS_OCOTP_MAX_TIMEOUT 1000000
+void imx_get_mac_from_fuse(char *mac)
+{
+ struct mx28_ocotp_regs *ocotp_regs =
+ (struct mx28_ocotp_regs *)MXS_OCOTP_BASE;
+ uint32_t data;
+
+ memset(mac, 0, 6);
+
+ writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
+
+ if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
+ MXS_OCOTP_MAX_TIMEOUT)) {
+ puts("MXS FEC: Can't get MAC from OCOTP\n");
+ return;
+ }
+
+ data = readl(&ocotp_regs->hw_ocotp_cust0);
+
+ mac[0] = 0x00;
+ mac[1] = 0x04;
+ /*
+ * Note:
+ *
+ * These first two bytes are Freescale's vendor MAC prefix.
+ *
+ */
+ mac[2] = (data >> 24) & 0xff;
+ mac[3] = (data >> 16) & 0xff;
+ mac[4] = (data >> 8) & 0xff;
+ mac[5] = data & 0xff;
+}
+#else
+void imx_get_mac_from_fuse(char *mac)
+{
+ memset(mac, 0, 6);
+}
+#endif
+
U_BOOT_CMD(
clocks, CONFIG_SYS_MAXARGS, 1, do_mx28_showclocks,
"display clocks",
diff --git a/arch/arm/include/asm/arch-mx28/sys_proto.h
b/arch/arm/include/asm/arch-mx28/sys_proto.h
index be1f7db..cf5ab16 100644
--- a/arch/arm/include/asm/arch-mx28/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx28/sys_proto.h
@@ -35,4 +35,6 @@ void mx28_common_spl_init(const iomux_cfg_t *iomux_setup,
const unsigned int iomux_size);
#endif
+void imx_get_mac_from_fuse(char *mac);
+
#endif /* __MX28_H__ */
diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
index fcee046..005446a 100644
--- a/board/denx/m28evk/m28evk.c
+++ b/board/denx/m28evk/m28evk.c
@@ -178,39 +178,4 @@ int board_eth_init(bd_t *bis)
return ret;
}
-#ifdef CONFIG_M28_FEC_MAC_IN_OCOTP
-
-#define MXS_OCOTP_MAX_TIMEOUT 1000000
-void imx_get_mac_from_fuse(char *mac)
-{
- struct mx28_ocotp_regs *ocotp_regs =
- (struct mx28_ocotp_regs *)MXS_OCOTP_BASE;
- uint32_t data;
-
- memset(mac, 0, 6);
-
- writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
-
- if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
- MXS_OCOTP_MAX_TIMEOUT)) {
- printf("MXS FEC: Can't get MAC from OCOTP\n");
- return;
- }
-
- data = readl(&ocotp_regs->hw_ocotp_cust0);
-
- mac[0] = 0x00;
- mac[1] = 0x04;
- mac[2] = (data >> 24) & 0xff;
- mac[3] = (data >> 16) & 0xff;
- mac[4] = (data >> 8) & 0xff;
- mac[5] = data & 0xff;
-}
-#else
-void imx_get_mac_from_fuse(char *mac)
-{
- memset(mac, 0, 6);
-}
-#endif
-
#endif
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
