On Fri, Dec 16, 2011 at 8:37 AM, Stefano Babic <sba...@denx.de> wrote:
> Call i2c initialization in spl_board_init only if I2C
> is configured for the board.
>
> Signed-off-by: Stefano Babic <sba...@denx.de>
> CC: Tom Rini <tom.r...@gmail.com>
> CC: Wolfgang Denk <w...@denx.de>
> CC: Simon Schwarz <simonschwarz...@gmail.com>
> ---
> arch/arm/cpu/armv7/omap3/board.c | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/omap3/board.c
> b/arch/arm/cpu/armv7/omap3/board.c
> index 1f33c63..889d650 100644
> --- a/arch/arm/cpu/armv7/omap3/board.c
> +++ b/arch/arm/cpu/armv7/omap3/board.c
> @@ -92,7 +92,9 @@ u32 omap_boot_device(void)
>
> void spl_board_init(void)
> {
> +#ifdef CONFIG_HARD_I2C
This should be CONFIG_HARD_I2C || CONFIG_SOFT_I2C. Or perhaps since
we're in SPL, CONFIG_SPL_I2C_SUPPORT ?
--
Tom
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
