-----Original Message----- From: Tabi Timur-B04825 Sent: Wednesday, January 11, 2012 1:03 AM To: Liu Gang-B34182 Cc: u-boot@lists.denx.de; alexandre.boun...@idt.com; Gala Kumar-B11780; Zang Roy-R61911; Xie Shaohui-B21989 Subject: Re: [U-Boot] [PATCH 6/8] powerpc/boot: Slave uploads ucode when boot from SRIO
On Tue, Jan 10, 2012 at 5:42 AM, Liu Gang <gang....@freescale.com> wrote: > When boot from SRIO, slave's ucode can be stored in master's memory > space, then slave can fetch the ucode image through SRIO interface. What kind of ucode is this? Fman or QE? [Liu Gang-B34182] Right now the ucode is for Fman. > + > + /* configure inbound window for slave's ucode */ > + printf("SRIOBOOT - MASTER: Inbound window for slave's ucode; " > + "Local = 0x%llx, Srio = 0x%llx, Size = > + 0x%x\n", > + (u64)CONFIG_SRIOBOOT_SLAVE_UCODE_LAW_PHYS, > + (u64)CONFIG_SRIOBOOT_SLAVE_UCODE_SRIO_PHYS, > + CONFIG_SRIOBOOT_SLAVE_UCODE_SIZE); > + out_be32((u32)&srio->riwtar3 + CONFIG_SRIOBOOT_MASTER_PORT * > + 0x200, These should be "(void *)" instead of "(u32)". [Liu Gang-B34182] Thanks very much! -- Timur Tabi Linux kernel developer at Freescale _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot