> CONFIG_SYS_INIT_SP_ADDR points to RAM, but it's used before > DRAM controller init. Fix it by setting CONFIG_SYS_INIT_SP_ADDR > to SRAM > > Signed-off-by: Vasily Khoruzhick <anars...@gmail.com> > --- > v2: no changes > v3: introduce PHYS_SRAM, use it for SYS_INIT_SP_ADDR calculation > > include/configs/zipitz2.h | 8 +++++++- > 1 files changed, 7 insertions(+), 1 deletions(-) > > diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h > index 4f48d9b..8add384 100644 > --- a/include/configs/zipitz2.h > +++ b/include/configs/zipitz2.h > @@ -170,6 +170,12 @@ unsigned char zipitz2_spi_read(void); > #endif > > /* > + * SRAM Map > + */ > +#define PHYS_SRAM 0x5c000000 /* SRAM Bank #1 */ > +#define PHYS_SRAM_SIZE 0x00040000 /* 256k */ > + > +/* > * DRAM Map > */ > #define CONFIG_NR_DRAM_BANKS 1 /* We have 1 bank of DRAM */ > @@ -185,7 +191,7 @@ unsigned char zipitz2_spi_read(void); > #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE > > #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 > -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1 + > 2048) +#define CONFIG_SYS_INIT_SP_ADDR > (GENERATED_GBL_DATA_SIZE + > PHYS_SRAM + 2048) > > /* > * NOR FLASH
Applied _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot