Add a NAND controller along with a bindings file for review.
Signed-off-by: Simon Glass <s...@chromium.org>
---
arch/arm/dts/tegra20.dtsi | 7 ++-
doc/device-tree-bindings/nand/nvidia-nand.txt | 68 +++++++++++++++++++++++++
2 files changed, 74 insertions(+), 1 deletions(-)
create mode 100644 doc/device-tree-bindings/nand/nvidia-nand.txt
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
index c009f16..33d6972 100644
--- a/arch/arm/dts/tegra20.dtsi
+++ b/arch/arm/dts/tegra20.dtsi
@@ -210,5 +210,10 @@
reg = <0x7000f400 0x200>;
};
+ nand: nand-controller@0x70008000 {
+ #address-cells = <0>;
+ #size-cells = <0>;
+ compatible = "nvidia,tegra20-nand";
+ reg = <0x70008000 0x100>;
+ };
};
-
diff --git a/doc/device-tree-bindings/nand/nvidia-nand.txt
b/doc/device-tree-bindings/nand/nvidia-nand.txt
new file mode 100644
index 0000000..3674cf3
--- /dev/null
+++ b/doc/device-tree-bindings/nand/nvidia-nand.txt
@@ -0,0 +1,68 @@
+NAND Flash
+----------
+
+(there isn't yet a generic binding in Linux, so this describes what is in
+U-Boot)
+
+The device node for a NAND flash device is as described in the document
+"Open Firmware Recommended Practice : Universal Serial Bus" with the
+following modifications and additions :
+
+Required properties :
+ - compatible : Should be "manufacture,device", "nand-flash"
+ - page-data-bytes : Number of bytes in the data area
+ - page-spare-bytes : * Number of bytes in spare area
+ spare area = skipped-spare-bytes + data-ecc-bytes + tag-bytes
+ + tag-ecc-bytes
+ - skipped-spare-bytes : Number of bytes to skip at start of spare area
+ (these are typically used for bad block maintenance)
+ - data-ecc-bytes : Number of ECC bytes for data area
+ - tag-bytes :Number of tag bytes in spare area
+ - tag-ecc-bytes : Number ECC bytes to be generated for tag bytes
+
+(replace -bytes with -size or -length?)
+
+This node should sit inside its controller.
+
+
+Nvidia NAND Controller
+----------------------
+
+The device node for a NAND flash controller is as described in the document
+"Open Firmware Recommended Practice : Universal Serial Bus" with the
+following modifications and additions :
+
+Optional properties:
+
+wp-gpio : GPIO of write-protect line, three cells in the format:
+ phandle, parameter, flags
+width : bus width of the NAND device in bits
+
+For now here is something specific to the Nvidia controller, with naming
+based on Nvidia's original (non-fdt) NAND driver:
+
+ - nvidia,nand-timing : Timing parameters for the NAND. Each is in ns.
+ Order is: MAX_TRP_TREA, TWB, Max(tCS, tCH, tALS, tALH),
+ TWHR, Max(tCS, tCH, tALS, tALH), TWH, TWP, TRH, TADL
+
+ MAX_TRP_TREA is:
+ non-EDO mode: Max(tRP, tREA) + 6ns
+ EDO mode: tRP timing
+
+Example:
+
+nand-controller@0x70008000 {
+ compatible = "nvidia,tegra20-nand";
+ wp-gpios = <&gpio 59 0>; /* PH3 */
+ width = <8>;
+ nvidia,timing = <26 100 20 80 20 10 12 10 70>;
+ nand@0 {
+ compatible = "hynix,hy27uf4g2b", "nand-flash";
+ page-data-bytes = <2048>;
+ tag-ecc-bytes = <4>;
+ tag-bytes = <20>;
+ data-ecc-bytes = <36>;
+ skipped-spare-bytes = <4>;
+ page-spare-bytes = <64>;
+ };
+};
--
1.7.7.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
