On Fri, Jan 13, 2012 at 5:49 PM, Dirk Behme <dirk.be...@de.bosch.com> wrote: > From: Troy Kisky <troy.ki...@boundarydevices.com> > > This allows the Linux kernel to use UART1 before pinmux > support is added for UART1 > > Signed-off-by: Troy Kisky <troy.ki...@boundarydevices.com> > CC: Troy Kisky <troy.ki...@boundarydevices.com> > CC: Jason Liu <jason....@linaro.org> > CC: Stefano Babic <sba...@denx.de> > --- > Note: This patch is against the recent head of u-boot-imx.git including > the SabreLite support: > > 5b894e4d00ff94a221f8cc23d54d08b889f54190 > i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board > > Note: tools/checkpatch.pl reports 0 errors, 0 warnings >
Acked-by: Jason Liu <jason....@linaro.org> > board/freescale/mx6qsabrelite/mx6qsabrelite.c | 6 ++++++ > 1 files changed, 6 insertions(+), 0 deletions(-) > > diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c > b/board/freescale/mx6qsabrelite/mx6qsabrelite.c > index 4028789..233e652 100644 > --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c > +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c > @@ -47,6 +47,11 @@ int dram_init(void) > return 0; > } > > +iomux_v3_cfg_t uart1_pads[] = { > + MX6Q_PAD_SD3_DAT6__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), > + MX6Q_PAD_SD3_DAT7__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), > +}; > + > iomux_v3_cfg_t uart2_pads[] = { > MX6Q_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), > MX6Q_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), > @@ -74,6 +79,7 @@ iomux_v3_cfg_t usdhc4_pads[] = { > > static void setup_iomux_uart(void) > { > + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); > imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); > } > > -- > 1.7.0.4 > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot