Hi Tom,

Le 19/01/2012 01:01, Tom Warren a écrit :
Albert,

Please pull u-boot-tegra/master into arm master. Thanks.

The following changes since commit 137703b811502dfea364650fb3e17f20b4c21333:

   overo: add SPL support (2012-01-16 08:40:13 +0100)

are available in the git repository at:
   git://git.denx.de/u-boot-tegra master

Simon Glass (9):
       tegra: Adjust funcmux config test to permit expansion
       tegra: Add enum to select from available funcmux configs
       tegra: Add I2C support to funcmux
       tegra: Add SDMMC support to funcmux
       tegra: Use funcmux for MMC on tamonten
       tegra: Use funcmux for MMC on harmony
       tegra: Use funcmux for MMC on seaboard
       tegra: mmc: Support operation with dcache enabled
       tegra2: Enable data cache

Stephen Warren (3):
       tegra2: Fix conflicting pinmux for UARTA
       tegra2: Fix default RAM size selection in odmdata
       tegra2: Add support for Compal Paz00 (Toshiba AC100)

MAINTAINERS                                |    1 +
arch/arm/cpu/armv7/tegra2/board.c          |   12 ++-
arch/arm/cpu/armv7/tegra2/funcmux.c        |  152 +++++++++++++++++++++++++---
arch/arm/include/asm/arch-tegra2/funcmux.h |   30 ++++++-
board/avionic-design/common/tamonten.c     |   10 +--
board/compal/paz00/Makefile                |   41 ++++++++
board/compal/paz00/paz00.c                 |   81 +++++++++++++++
board/nvidia/harmony/harmony.c             |   19 +---
board/nvidia/seaboard/seaboard.c           |   21 +---
boards.cfg                                 |    1 +
drivers/mmc/tegra2_mmc.c                   |   16 +++
include/configs/paz00.h                    |   51 +++++++++
12 files changed, 379 insertions(+), 56 deletions(-)
create mode 100644 board/compal/paz00/Makefile
create mode 100644 board/compal/paz00/paz00.c
create mode 100644 include/configs/paz00.h

Applied to u-boot-arm/master, thanks!

Would it be possible, though, not to have this in your mails to the list?

-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may 
contain
confidential information.  Any unauthorized review, use, disclosure or 
distribution
is prohibited.  If you are not the intended recipient, please contact the 
sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------

Amicalement,
--
Albert.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to