On 01/31/2012 02:31 AM, Jason Hui wrote:
Eric,
On Tue, Jan 31, 2012 at 3:52 AM, Eric Nelson
<eric.nel...@boundarydevices.com> wrote:
Signed-off-by: Eric Nelson<eric.nel...@boundarydevices.com>
Acked-by: Dirk Behme<dirk.be...@de.bosch.com>
Acked-by: Stefano Babic<sba...@denx.de>
---
board/freescale/mx6qsabrelite/imximage.cfg | 2 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 25 +++++++++++++++++++++++++
include/configs/mx6qsabrelite.h | 9 +++++++++
3 files changed, 35 insertions(+), 1 deletions(-)
After apply the patch, I have the build errors:
../mx6qsabrelite/mx6qsabrelite.c:211: undefined reference to `IMX_GPIO_NR'
So, the patch should depends on others. If one patch set is depend on
others, it's better to tell it
in the cover letter of your patch set. Thanks.
Ouch! It's all about the GPIO numbers...
This occurred when I re-based to Stefano's tree and will require
another patch to keep the BANK:OFFSET numbering scheme. There's a
patch lingering in Dirk's tree that defines IMX_GPIO_NR() in gpio.h.
See http://lists.denx.de/pipermail/u-boot/2012-January/116866.html
for details.
I was hoping to get some feedback before generating a patch and
revising this patch (and removing GPIO_3_19 macro):
http://lists.denx.de/pipermail/u-boot/2012-January/116874.html
That said, I'll revise and re-send along with a patch adding
support for:
GPIO_NUMBER(port,index)
GPIO_PORT(number)
GPIO_INDEX(number)
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
