On 02/06/12 13:57, Govindraj wrote: > On Mon, Feb 6, 2012 at 5:12 PM, Igor Grinberg <grinb...@compulab.co.il> wrote: >> On 02/03/12 15:38, Govindraj.R wrote: >>> From: "Govindraj.R" <govindraj.r...@ti.com> >>> >>> Adding ehci clock enabling mechanism part of clock framework. >>> When essential clocks are enabled during init phase usb host >>> clocks can also be enabled from clock framework. >>> >>> Signed-off-by: Govindraj.R <govindraj.r...@ti.com> >> >> Acked-by: Igor Grinberg <grinb...@compulab.co.il> >> >>> --- >>> arch/arm/cpu/armv7/omap3/board.c | 4 ++++ >>> arch/arm/cpu/armv7/omap3/clock.c | 20 ++++++++++++++++++++ >>> arch/arm/cpu/armv7/omap4/clocks.c | 5 +++++ >>> arch/arm/include/asm/arch-omap3/sys_proto.h | 1 + >>> 4 files changed, 30 insertions(+), 0 deletions(-) >>> >>> diff --git a/arch/arm/cpu/armv7/omap3/board.c >>> b/arch/arm/cpu/armv7/omap3/board.c >>> index 871aa37..054e9c4 100644 >>> --- a/arch/arm/cpu/armv7/omap3/board.c >>> +++ b/arch/arm/cpu/armv7/omap3/board.c >>> @@ -228,6 +228,10 @@ void s_init(void) >>> >>> per_clocks_enable(); >>> >>> +#ifdef CONFIG_USB_EHCI_OMAP >>> + ehci_clocks_enable(); >>> +#endif >> >> Just a question (not blocking): >> I would really like to see this being a part of "usb start" call some day... >> Can't this be called from omap_ehci_hcd_init()? > > But its better to have it part of clock framework. > > on omap4 I have added this part of enabling essential > clocks done part of clock framework. > > "arch/arm/cpu/armv7/omap[4/5]/clocks.c" => > "arch/arm/cpu/armv7/omap-common/clocks-common.c" > > but on omap3 we don't seem to use clocks common. > so I have just used this function. > > on omap4/5 clocks.c makes things simpler for us. > (re-use the same rather to complicate with our funcs)
Yes, I understand, it is indeed simpler. I'm trying also to see this from the final product POV, where things like power consumption and supermarket principle (pay only for what you buy) can meter. Again, this is fine (I already acked the patch), just wanted to know how difficult would it be to get it fine tuned for "usb start/stop". Thanks -- Regards, Igor. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
