Fix build error for ethernut5 and mx6qarm2 board due
to prototype change for function board_mmc_getcd()
ethernut5.c:238: error: conflicting types for 'board_mmc_getcd'
u-boot/include/mmc.h:318: note: previous declaration of 'board_mmc_getcd' was
here
make[2]: *** [ethernut5.o] Error 1
Signed-off-by: Prabhakar Lad <prabhakar.cse...@gmail.com>
---
board/egnite/ethernut5/ethernut5.c | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/board/egnite/ethernut5/ethernut5.c
b/board/egnite/ethernut5/ethernut5.c
index e42e91e..fd021a3 100644
--- a/board/egnite/ethernut5/ethernut5.c
+++ b/board/egnite/ethernut5/ethernut5.c
@@ -235,10 +235,9 @@ int board_mmc_init(bd_t *bd)
return atmel_mci_init((void *)ATMEL_BASE_MCI);
}
-int board_mmc_getcd(u8 *cd, struct mmc *mmc)
+int board_mmc_getcd(struct mmc *mmc)
{
- *cd = at91_get_pio_value(CONFIG_SYS_MMC_CD_PIN) ? 1 : 0;
- return 0;
+ return !at91_get_pio_value(CONFIG_SYS_MMC_CD_PIN);
}
#endif
--
1.7.4.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
