Hi, Wolfgang, >-----Original Message----- >From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] >On Behalf Of Wolfgang Grandegger >Sent: Monday, February 13, 2012 8:08 PM >To: U-Boot >Subject: [U-Boot] mx6: consolidating and extending anadig/analog/anatop >register defs > >Hello, > >for the USB support on MX6Q, I'm trying to consolidate and extend the >register definitions for the ANADIG registers. Unfortunately, three different >names are used for the same registers: ANADIG, analog and ANATOP. Any >idea what the names do stand for and what would be the most appropriate >one. Apart from that, we should have a separate structure and header file for >these registers. Currently, they are added to the CCM regs.
The register definition in the CCM according to the RM as followings: Addresses: CCM_analog_PLL_SYS is 0h base + 0h offset = 0000_0000h CCM_analog_PLL_SYS_SET is 0h base + 4h offset = 0000_0004h CCM_analog_PLL_SYS_CLR is 0h base + 8h offset = 0000_0008h CCM_analog_PLL_SYS_TOG is 0h base + Ch offset = 0000_000Ch Thus, I put the register definition into the CCM parts. > >Wolfgang. > >_______________________________________________ >U-Boot mailing list >U-Boot@lists.denx.de >http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot