[U-Boot] [PATCH] mx6q: mx6qsabrelite: setup_spi() should be called in board_init to allow use for environment

[Eric Nelson]

Signed-off-by: Eric Nelson <eric.nel...@boundarydevices.com>
---
 board/freescale/mx6qsabrelite/mx6qsabrelite.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c 
b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
index db1bea9..7fe2dc9 100644
--- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
+++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
@@ -259,10 +259,6 @@ int board_eth_init(bd_t *bis)
        if (ret)
                printf("FEC MXC: %s:failed\n", __func__);
 
-#ifdef CONFIG_MXC_SPI
-       setup_spi();
-#endif
-
        return 0;
 }
 
@@ -278,6 +274,10 @@ int board_init(void)
        /* address of boot parameters */
        gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
+#ifdef CONFIG_MXC_SPI
+       setup_spi();
+#endif
+
        return 0;
 }
 
-- 
1.7.9

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot