On Feb 29, 2012, at 12:17 AM, Govindraj wrote: > On Wed, Feb 29, 2012 at 4:47 AM, Kumar Gala <ga...@kernel.crashing.org> wrote: >> Does anyone have usb ethernet working on top of git tree on a panda board? >> > yes. > >> If so any gotcha's or details on how you have it working. > > I use following commands: > > setenv usbethaddr 0:0:1:2:3:4;usb start; > > After Ethernet enumerates, from u-boot I use following bootargs > > setenv ipaddr xxx.xxx.xxx.xxx;setenv serverip xxx.xxx.xxx.xxx;setenv > gatewayip xxx.xxx.xxx.xxx;setenv netmask xxx.xxx.xxx.xx; > setenv bootfile xxxxxx;setenv bootcmd 'tftp 80300000;bootm 80300000'; > setenv bootargs console=ttyO2,115200n8 noinitrd root=/dev/nfs rw > nfsroot=<path_to_fs>,nolock,tcp, wsize=1024,rsize=1024 ip=dhcp > devfs=mount; > boot;
I try and get: Panda # setenv usbethaddr 0:0:1:2:3:4;usb start; (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found scanning bus for ethernet devices... 1 Ethernet Device(s) found Panda # setenv ipaddr 192.168.1.100; setenv serverip 192.168.1.1 Panda # setenv gatewayip 192.168.1.1 Panda # setenv netmask 255.255.255.0 Panda # ping 192.168.1.1 Waiting for Ethernet connection... done. Using sms0 device EHCI timed out on TD - token=0x8008d80 ping failed; host 192.168.1.1 is not alive Panda # ---- Not sure if the 'EHCI timed out...' message is normal or expected. - k _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot