On 02/03/2012 23:55, Eric Nelson wrote:
> Allow non-dt kernels to boot
>
> Signed-off-by: Troy Kisky <troy.ki...@boundarydevices.com>
> ---
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 6 ++++--
> include/configs/mx6qsabrelite.h | 1 +
> 2 files changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
> b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
> index 590030b..2786482 100644
> --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
> +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
> @@ -282,8 +282,10 @@ int board_early_init_f(void)
>
> int board_init(void)
> {
> - /* address of boot parameters */
> - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
> + /* board id for linux */
> + gd->bd->bi_arch_number = MACH_TYPE_MX6Q_SABRELITE;
You do not needed. This is done in common code. Add only
CONFIG_MACH_TYPE in mx6qsabrelite.h
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
