Hi Albert,
please pull from u-boot-imx, thanks.
The following changes since commit 2271e7c6e8eef883b834fb7d07911848a54fde13:
Ethernut 5: fix build error (2012-02-29 01:06:56 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Dirk Behme (1):
mx6q: mx6qsabrelite: Update the README
Marek Vasut (3):
M28: Fix LCD PINMUX
M28: Support for the old M28 SoM v1.0
i.MX28: Reformat the DRAM memory configuration data
Robert Delien (5):
i.mx28: Added register definitions for DIGCTL registers
i.mx28: Replaced magic numbers for scratch register addresses with
register definitions
Renamed mx28_register to mx28_register_32 to prepare for
mx28_register_8
Introducing 8-bit wide register, mx28_register_8
Fix erroneous 32-bit access to hw_clkctrl_frac0 and
hw_clkctrl_frac1 registers
Wolfgang Grandegger (2):
usb/ehci: Add USB support for the MX6Q
mx6qsabrelite: add and enable USB Host 1 support
arch/arm/cpu/arm926ejs/mx28/clock.c | 74 +++-----
arch/arm/cpu/arm926ejs/mx28/iomux.c | 6 +-
arch/arm/cpu/arm926ejs/mx28/mx28.c | 14 +-
arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 120 ++++++------
arch/arm/cpu/armv7/mx6/clock.c | 13 ++
arch/arm/include/asm/arch-mx28/imx-regs.h | 1 +
arch/arm/include/asm/arch-mx28/regs-apbh.h | 254
++++++++++++------------
arch/arm/include/asm/arch-mx28/regs-bch.h | 42 ++--
arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 98 ++++------
arch/arm/include/asm/arch-mx28/regs-common.h | 28 ++-
arch/arm/include/asm/arch-mx28/regs-digctl.h | 155 +++++++++++++++
arch/arm/include/asm/arch-mx28/regs-gpmi.h | 26 ++--
arch/arm/include/asm/arch-mx28/regs-i2c.h | 28 ++--
arch/arm/include/asm/arch-mx28/regs-ocotp.h | 86 ++++----
arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 168 ++++++++--------
arch/arm/include/asm/arch-mx28/regs-power.h | 28 ++--
arch/arm/include/asm/arch-mx28/regs-rtc.h | 28 ++--
arch/arm/include/asm/arch-mx28/regs-ssp.h | 40 ++--
arch/arm/include/asm/arch-mx28/regs-timrot.h | 38 ++--
arch/arm/include/asm/arch-mx28/regs-usbphy.h | 20 +-
arch/arm/include/asm/arch-mx28/sys_proto.h | 10 +-
arch/arm/include/asm/arch-mx6/clock.h | 1 +
arch/arm/include/asm/arch-mx6/imx-regs.h | 3 +
board/denx/m28evk/spl_boot.c | 16 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 18 ++
doc/README.mx6qsabrelite | 12 +-
drivers/gpio/mxs_gpio.c | 16 +-
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-mx6.c | 205 ++++++++++++++++++++
drivers/usb/host/ehci-mxs.c | 8 +-
include/configs/mx6qsabrelite.h | 13 ++
31 files changed, 988 insertions(+), 582 deletions(-)
create mode 100644 arch/arm/include/asm/arch-mx28/regs-digctl.h
create mode 100644 drivers/usb/host/ehci-mx6.c
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
