Dear Marek,

On 3/5/2012 11:51 PM, Marek Vasut wrote:
Dear Amit Virdi,

From: Shiraz Hashim<shiraz.has...@st.com>

While receiving packets from FIFO sometimes the buffer provided was
nonaligned. Fix this by taking a temporary aligned buffer and then
copying the content to nonaligned buffer.

Signed-off-by: Shiraz Hashim<shiraz.has...@st.com>
Signed-off-by: Amit Virdi<amit.vi...@st.com>
---
  drivers/usb/gadget/designware_udc.c |   15 ++++++++++++++-
  1 files changed, 14 insertions(+), 1 deletions(-)

diff --git a/drivers/usb/gadget/designware_udc.c
b/drivers/usb/gadget/designware_udc.c index d4b53a2..878123c 100644
--- a/drivers/usb/gadget/designware_udc.c
+++ b/drivers/usb/gadget/designware_udc.c
@@ -202,6 +202,7 @@ static int usbgetpckfromfifo(int epNum, u8 *bufp, u32
len) u32 i, nw, nb;
        u32 *wrdp;
        u8 *bytp;
+       u32 tmp[128];

        if (readl(&udc_regs_p->dev_stat)&  DEV_STAT_RXFIFO_EMPTY)
                return -1;
@@ -209,7 +210,12 @@ static int usbgetpckfromfifo(int epNum, u8 *bufp, u32
len) nw = len / sizeof(u32);
        nb = len % sizeof(u32);

-       wrdp = (u32 *)bufp;
+       /* use tmp buf if bufp is not word aligned */
+       if ((int)bufp&  0x3)
+               wrdp = (u32 *)&tmp[0];
+       else
+               wrdp = (u32 *)bufp;
+
        for (i = 0; i<  nw; i++) {
                writel(readl(fifo_ptr), wrdp);
                wrdp++;
@@ -223,6 +229,13 @@ static int usbgetpckfromfifo(int epNum, u8 *bufp, u32
len) }
        readl(&outep_regs_p[epNum].write_done);

+       /* copy back tmp buffer to bufp if bufp is not word aligned */
+       if ((int)bufp&  0x3) {
+               bytp = (u8 *)&tmp[0];
+               for (i = 0; i<  len; i++)
+                       bufp[i] = bytp[i];
+       }
+
        return 0;
  }

This addresses EHCI cache problem, that's why you need bounce buffer, right?


No. The problem was we were copying data word-by-word to a non-word aligned memory in the USB gadget. So, this is different from the USB host controller issue.


Thanks n Regards
Amit Virdi

This is the patch from Puneet, can you give it a go and tell me if EHCI works
for you without 4/4 patch from your series or do you still see issues?

http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/126447

Thanks in advance!

Best regards,
Marek Vasut
.

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to