Thank you Scott and Fabio, You help is much appreciated.
I will try to add the nand support for mx53 mainline. However, what I am trying to do is to build a u-boot that supports NAND and have YAFFS2 as well and at moment I use the mx53_ard board since this is very close to what my custom board will be. I was able to build such a version, using Freescale u-boot sources, which included nand subsystem, and yaffs commands. Then I needed to create partitions in the nand and this is where i "discovered" I needed the support of mtdparts command. So I, guess, I need to configure the u-boot for mtdparts support. This is where I am at. -Bud > -----Original Message----- > From: Scott Wood > Sent: Friday, 9 March 2012 12:04 p.m. > To: Bud Miljkovic > Cc: Fabio Estevam; > Subject: Re: [U-Boot] Enabling nand createbbt command > > I do expect mainline is better maintained and supported, except for > missing particular features/hardware support that nobody ever bothered > to submit to mainline -- which in this case appears to be hardware > that you care about, so unless you're prepared to do a fair bit of > work to add support to mainline, I'd try again to find a support > channel for your Freescale-provided U-Boot. Or maybe we could help > you figure out what it is you want to do, instead of scrubbing, if the > answer doesn't depend on details of a non-standard U-Boot. > > Oh, and if you're curious about my freescale.com e-mail address, I > work in a different part of the company and don't have i.MX knowledge > or contacts. > > -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
