Folks, > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of Simon Glass > Sent: Saturday, March 10, 2012 12:35 PM > To: Wolfgang Denk > Cc: Albert ARIBAUD; Tom Warren; Stephen Warren; U-Boot Mailing List > Subject: Re: pull request for u-boot-tegra/master > > Hi, > > On Sat, Mar 10, 2012 at 12:25 AM, Wolfgang Denk <[email protected]> wrote: > > Dear Albert, > > > > In message > <[email protected]> Tom Warren > wrote: > >> > >> Please pull u-boot-tegra/master into arm master. Thanks! > > > > > > Please do NOT pull this. > > > >> ns16550: Add function to drain serial output > >> Enable printf() console if pre-console putc() is available > >> tegra: Implement pre-console putc() for fdt warning > >> tegra: Enable pre-console putc() for Tegra boards > > > > I'm not OK with these patches yet. Also, they affect common code. > > [speaking for Stephen here, and from my understanding so I may have this a > bit wrong] > > There are separate from the others, added at Stephen's request so that the > board will not be a brick if someone flashes the wrong binary onto the > board. Stephen's issue is that he wants u-boot.bin to include both the U- > Boot binary and the device tree binary. He created a patch for this. > > http://patchwork.ozlabs.org/patch/145633/ > > In any case regardless of the resolution of that issue we need to get some > sort of panic message to the user for SPL and device tree problems. > > I agree that these four patches need review before pulling. I have responded > on the other threads. > > Regards, > Simon
Is there a way we can get this unstuck so a pull request can go through? Maybe put back Stephen's u-boot.bin change in CL#145633, and remove the 4 pre-console patches until a scheme can be cooked up that everyone agrees with? I'm basically dead in the water until I get this baseline set of USB/fdt patches in - the next patches for Tegra2 that have been queued up for weeks all depend on the fdt patches to go in first (I2C, warmboot/LP0, LCD, kbd). Thanks, Tom > > > > > Best regards, > > > > Wolfgang Denk > > > > -- > > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] > > Never underestimate the power of human stupidity when it comes to > > using technology they don't understand. -- nvpublic _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
