Dear Stephen Warren, > On 03/13/2012 09:47 PM, Marek Vasut wrote: > > From: Marek Vasut <marek.va...@gmail.com> > > > > This command boots Linux zImage from where the zImage is loaded to. > > Passing initrd and fdt is supported. > > > > Tested on i.MX28 based DENX M28EVK > > Tested on PXA270 based Voipac PXA270. > > > > NOTE: This currently only supports ARM, but other architectures can be > > easily added by defining bootz_setup(). > > > > Signed-off-by: Marek Vasut <marek.va...@gmail.com> > > On Tegra20 Harmony with and without device tree (against mainline) and > Tegra30 Cardhu with device tree (against an NVIDIA-internal U-Boot tree), > > Tested-by: Stephen Warren <swar...@wwwdotorg.org> > > The code looks good too; I believe you've take care of any comments I > had on the first very you posted. > > Thanks very much - this is awesome!
You're welcome :) I'm glad we're finally going to squash one of the biggest sources of friction between linux-arm and uboot :) Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot