On 13/03/2012 18:26, Fabio Estevam wrote: > After booting mx6qsabrelite from POR the following is reported: > > CPU: Freescale i.MX61 family rev1.0 at 792 MHz > > Reset cause: unknown reset > > This is because both the POR and WDOG bits are set after reset. > > Fix this by also checking both bits in the POR case. > > Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot