On Thursday, March 22, 2012 4:06 PM, Stefano Babic wrote: > Hi Martin, Hello Stefano
> please do not remove the ML when you post an answer. Your experience can > be helpful for other people, too. Sorry about that, I just hit the replay button and didn't realized that the answer went directly to you instead to the mailing list. > Generally, they can share the same value, but they have different > meaning. For TX25, the link address is set in board/karo/tx25/config.mk. > However, this is the old way to do things. Currently, > CONFIG_SYS_TEXT_BASE (link address) must be set into the board > configuration file (tx25.h). > CONFIG_SYS_NAND_U_BOOT_DST tells the first loader (nand_spl) where > u-boot code must be copied. If u-boot has a small header that must be > also copied, the two address are different. On tx25, they have the same > value. Thank you very much for your explanation. I'd like to learn how u-boot works and how a board support package have to be implemented. Probably I'd better choose another board if the BSP of the TX25 uses some deprecated ways. Best regards, Martin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot