On 03/04/2012 07:26, Gachet Daniel wrote: > Hi Stefano, Hi Daniel,
> > No problem, I will do it with the inverse logic, using a > CONFIG_NAND_MXC_NFC_TWO_CYCLES, and adapt the tx25.h file. But could > you tell me in which README file I should add the description for > that switch? I have a look at all README, but no one has any > description about NAND flash configuration flags (like > CONFIG_NAND_MXC, CONFIG_NAND_MXC_V1_1 or CONFIG_MXC_NAND_HWECC). You have found missing documentation ;-(. Maybe it was not checked before, but you're right: there is no documentation for this driver. Even worse, there is no "NAND Support" at all. Please feel free to add a section. I think the right place is under "Low Level (hardware related) configuration options", adding a part for the MXC Nand driver. And if you want to integrate it with the missing documentation for the other CONFIG_NAND_MXC options, it will be highly appreciated. Thanks, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot