Hi, On Tue, Apr 3, 2012 at 5:47 PM, Simon Glass <s...@chromium.org> wrote: > Hi Olof, > > On Mon, Apr 2, 2012 at 10:22 PM, Olof Johansson <o...@lixom.net> wrote: >> On Mon, Apr 2, 2012 at 4:19 PM, Simon Glass <s...@chromium.org> wrote: >>> This adds timings for T20 and T25 Seaboards, using the bindings found here: >>> >>> http://patchwork.ozlabs.org/patch/132928/ >>> >>> We supply both full speed options for normal running, and half speed options >>> for testing / development. >>> >>> Signed-off-by: Simon Glass <s...@chromium.org> >> >> This seems incorrect to me. You provide both T20 and T25 EMC tables in >> the same device tree with no way to determine which one to use. >> >> Unfortunately nvidia didn't use the boot straps to tell if they were >> on a t20 or t25 seaboard, so you'll just have to know. At the kernel >> side we chose to just ditch T20 since most boards still in use are >> T25. > > The selection of memory speed is down to the board. There is a later > patch in this series (just cc'd to you) which looks at the SOC ID to > determine whether it is T20 or T25, and selects the speed accordingly. > This speed is used to look up the correct table in the device tree
Well if we really want to do this properly we should have a separate device tree file for the T20 Seaboard. Since the kernel has dropped T20 support, we should do the same. I have updated this patch. Regards, Simon > >> >> >> >> -Olof > > Regards, > Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot