Add a flash node to handle the NAND, including memory timings and
page / block size information.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v2:
- Update NAND binding to add "nvidia," prefix
Changes in v3:
- Add reg property for unit address (should be used for chip select)
- Update fdt binding to make everything Nvidia-specific
board/nvidia/dts/tegra2-seaboard.dts | 16 ++++++++++++++++
1 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/board/nvidia/dts/tegra2-seaboard.dts
b/board/nvidia/dts/tegra2-seaboard.dts
index 08ada8c..72a5f5d 100644
--- a/board/nvidia/dts/tegra2-seaboard.dts
+++ b/board/nvidia/dts/tegra2-seaboard.dts
@@ -126,4 +126,20 @@
0x00000000 0x00000000 0x00000000 0x00000000 >;
};
};
+
+ nand-controller@70008000 {
+ nvidia,wp-gpios = <&gpio 59 0>; /* PH3 */
+ nvidia,width = <8>;
+ nvidia,timing = <26 100 20 80 20 10 12 10 70>;
+ nand@0 {
+ reg = <0>;
+ compatible = "hynix,hy27uf4g2b", "nand-flash";
+ nvidia,page-data-bytes = <2048>;
+ nvidia,tag-ecc-bytes = <4>;
+ nvidia,tag-bytes = <20>;
+ nvidia,data-ecc-bytes = <36>;
+ nvidia,skipped-spare-bytes = <4>;
+ nvidia,page-spare-bytes = <64>;
+ };
+ };
};
--
1.7.7.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
