Gary wrote... > I'm trying to update U-boot on my board from v2011.06 to v2011.12 > It's an OMAP 3530, much like the BeagleBoard, with SMSC911x networking.
So not a BeagleBoard then but something different. Is the board you are using one of the boards supported in the mainline U-Boot tree or is it an out-of-tree port? If it is in mainline then have you chosen the correct configuration to use? > I've looked through the 'bootm' path and I can't see what might > have changed that would cause such behaviour. As far as I can > tell, everything else is working in Linux with the new U-Boot, > just not the SMSC device. If you try to use TFTP in U-Boot does that work? If not then I would guess there is a configuration issue with the devices that you have enabled in U-Boot rather than it being an issue with the bootm command. Regards, Andy. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot