Hi, I am able to successfully boot a zImage kernel with latest 2012.04 U-boot on mx28evk.
Now I want to boot a dt zImage version. These are the steps I am doing: make menuconfig and select [*] Support MXS platforms from device tree make imx28-evk.dtb make cat arch/arm/boot/imx28-evk.dtb arch/arm/boot/zImage > arch/arm/boot/zImage_dtb cp arch/arm/boot/zImage_dtb /tftpboot/zImage Then I get the following result: U-Boot 2012.04-00001-ga1f2367-dirty (Apr 23 2012 - 10:01:52) Freescale i.MX28 family at 454 MHz DRAM: 128 MiB MMC: MXS MMC: 0 In: serial Out: serial Err: serial Net: FEC0, FEC1 Hit any key to stop autoboot: 0 BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 10.29.244.54 Using FEC0 device TFTP from server 10.29.240.143; our IP address is 10.29.244.54 Filename 'zImage'. Load address: 0x42000000 Loading: ## Warning: gatewayip needed but not set ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################## done Bytes transferred = 2250927 (2258af hex) Bad Linux ARM zImage magic! Any idea of why this is failing? Thanks, Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot