Introduce spi_cs_is_valid() for validating spi bus and chip select numbers.
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
Changes since v1:
- Newly introduced in v2
drivers/spi/mxs_spi.c | 13 +++++++++++--
1 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c
index 4e6f14e..e7237e7 100644
--- a/drivers/spi/mxs_spi.c
+++ b/drivers/spi/mxs_spi.c
@@ -51,14 +51,23 @@ void spi_init(void)
{
}
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ /* MXS SPI: 4 ports and 3 chip selects maximum */
+ if (bus > 3 || cs > 2)
+ return 0;
+ else
+ return 1;
+}
+
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int mode)
{
struct mxs_spi_slave *mxs_slave;
uint32_t addr;
- if (bus > 3) {
- printf("MXS SPI: Max bus number is 3\n");
+ if (!spi_cs_is_valid(bus, cs)) {
+ printf("mxs_spi: invalid bus %d / chip select %d\n", bus, cs);
return NULL;
}
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
