After an update to the MX51 reference manual (Rev. 5), the
values of the PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH
are now clearly wrong:
"Bit 13:
High / Low Output Voltage Range. This bit selects the output voltage mode for
SD2_CMD. 0 High output voltage mode
1 Low output voltage mode"
The values are currently negated in code - fixed.
Reported-by: David Jander <david.jan...@protonic.nl>
Signed-off-by: Stefano Babic <sba...@denx.de>
CC: Marek Vasut <marek.va...@gmail.com>
CC: David Jander <david.jan...@protonic.nl>
---
arch/arm/include/asm/arch-mx5/iomux.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx5/iomux.h
b/arch/arm/include/asm/arch-mx5/iomux.h
index 760371b..e3765a3 100644
--- a/arch/arm/include/asm/arch-mx5/iomux.h
+++ b/arch/arm/include/asm/arch-mx5/iomux.h
@@ -66,8 +66,8 @@ typedef enum iomux_pad_config {
PAD_CTL_HYS_ENABLE = 0x1 << 8, /* Hysteresis enabled */
PAD_CTL_DDR_INPUT_CMOS = 0x0 << 9,/* DDR input CMOS */
PAD_CTL_DDR_INPUT_DDR = 0x1 << 9,/* DDR input DDR */
- PAD_CTL_DRV_VOT_LOW = 0x0 << 13, /* Low voltage mode */
- PAD_CTL_DRV_VOT_HIGH = 0x1 << 13,/* High voltage mode */
+ PAD_CTL_DRV_VOT_LOW = 0x1 << 13, /* Low voltage mode */
+ PAD_CTL_DRV_VOT_HIGH = 0x0 << 13,/* High voltage mode */
} iomux_pad_config_t;
/* various IOMUX input functions */
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
