On 01/05/2012 23:09, Marek Vasut wrote: > These are some improvements that were stuck in my tree for a while, time to > expunge them, please consider applying. > > Tested on: > * DENX M28EVK v2.0 > * DENX M28EVK v1.1 > * Mysterious board #1 ... > * Unnamed board #2 ... > > Marek Vasut (13): > FEC: Abstract out register setup > M28EVK: Implement support for new board V2.0 > M28EVK: Add SD update command > i.MX28: Improve passing of data from SPL to U-Boot > i.MX28: Implement boot pads sampling and reporting > i.MX28: Add LCDIF register definitions > i.MX28: Shut down the LCD controller before reset > i.MX28: Add LRADC register definitions > i.MX28: Add LRADC init to i.MX28 SPL > i.MX28: Reorder battery status functions in SPL > i.MX28: Add battery boot components to SPL > i.MX28: Check if WP detection is implemented at all > i.MX28: Avoid redefining serial_put[cs]()
Applied to u-boot-imx, thanks Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot