Hi, Le 09/05/2012 19:21, Daniel Stodden a écrit : > On Wed, 2012-05-09 at 08:25 -0500, David Purdy wrote: >> On Wed, May 9, 2012 at 3:00 AM, Daniel Stodden >> <daniel.stod...@googlemail.com> wrote: >>>> >>>> >>>> Have you tried to put the bootrom in the debug mode ? >>>> >>>> https://doukki.net/doku.php?id=wiki:tutoriels:u-boot.uart#boot_from_uart0 >>>> >>>> Réfs : >>>> http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf >>>> >>>> May be it can helps to understand the 1.11 and 1.21 differences ? >>> >>> I never played with it. But according to the documentation, it's rather >>> orthogonal to image upload. You get a command line interface. However, I >>> see no command references in the docs. >>> >>> Might support entering it in kwboot in the future, but I don't see how >>> it's would help with the protocol issues. >>> >>> Daniel >>> >> >> >> @ Daniel: Just 2 thoughts... >> >> 1. (less important...) I wonder if it is possible to query the >> BootROM version via UART... if possible, on detecting 111 @ offset >> ff00003c, have it print "Not Supported on V1.11 BootROM" > > Unless s/o can point me at documentation for the debug mode, I'm not > sure whether that's going to work smoothly. Sounds more prone to future > breakage, as the device firmware evolves. > > Iff people would really like to see that supported, I'd rather suggest > to make it some --test command. Not run ahead of the regular boot mode. > Which then could match against a black/white list of firmware versions > tested.
I do not know the importance that it may be have. I have done a dump from one of my sheevaplug bootrom (v1.11) and it's big-endianness. The GoFlex found [1] is little-endianness. I can send the binary dump and results disasm if needed. >> 2. (more importantly) : I am actually _just_fine__ w/ the level of >> function in your current V2. You've already done a good service to >> those work on Kirkwood stuff, and would want to press anyone into >> fixing something that they/we didn't break and possibly can't be >> fixed. [There may well be a reason no one has gotten anything w/ the >> V1.11 BootROM to work with UART-booting.] >> >> For me, your V2 already feels "mature". Its a big step forward from >> where we were. > > Thanks. > > I'll fix the select() glitch mentioned before and send out v3. > > Daniel > > [1]http://wiki.scottn.us/goflex:start
signature.asc
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot