The PLL setup values currently assume a 24 Mhz input clock. This patch uses V_OSCK from the board config file to support boards with different input clock rates.
Signed-off-by: Steve Sakoman <st...@sakoman.com> --- arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h index abc5b6b..d748dd2 100644 --- a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h +++ b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h @@ -19,16 +19,16 @@ #ifndef _CLOCKS_AM33XX_H_ #define _CLOCKS_AM33XX_H_ -#define OSC 24 +#define OSC (V_OSCK/1000000) /* MAIN PLL Fdll = 550 MHZ, */ #define MPUPLL_M 550 -#define MPUPLL_N 23 +#define MPUPLL_N (OSC-1) #define MPUPLL_M2 1 /* Core PLL Fdll = 1 GHZ, */ #define COREPLL_M 1000 -#define COREPLL_N 23 +#define COREPLL_N (OSC-1) #define COREPLL_M4 10 /* CORE_CLKOUTM4 = 200 MHZ */ #define COREPLL_M5 8 /* CORE_CLKOUTM5 = 250 MHZ */ @@ -40,13 +40,13 @@ * For clkout = 192 MHZ, Fdll = 960 MHZ, divider values are given below */ #define PERPLL_M 960 -#define PERPLL_N 23 +#define PERPLL_N (OSC-1) #define PERPLL_M2 5 /* DDR Freq is 266 MHZ for now */ /* Set Fdll = 400 MHZ , Fdll = M * 2 * CLKINP/ N + 1; clkout = Fdll /(2 * M2) */ #define DDRPLL_M 266 -#define DDRPLL_N 23 +#define DDRPLL_N (OSC-1) #define DDRPLL_M2 1 extern void pll_init(void); -- 1.7.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
