Hi Steve, [snip] > --- > arch/arm/cpu/armv7/omap4/sdram_elpida.c | 6 +++--- > 1 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c > b/arch/arm/cpu/armv7/omap4/sdram_elpida.c > index b538960..0599aaa 100644 > --- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c > +++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c > @@ -46,6 +46,9 @@ > * - emif_get_device_timings() > */ > > +/* Dummy registers for OMAP44xx */ > +const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG]; > + > #ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS > > static const struct emif_regs emif_regs_elpida_200_mhz_2cs = { > @@ -90,9 +93,6 @@ const struct emif_regs emif_regs_elpida_400_mhz_2cs = { > .emif_ddr_phy_ctlr_1 = 0x049ff418 > }; > > -/* Dummy registers for OMAP44xx */ > -const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG]; > - > const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = { > .dmm_lisa_map_0 = 0xFF020100, > .dmm_lisa_map_1 = 0, In fact ext phy registers are not required for OMAP4 at all. Just posted a patch to fix this. http://marc.info/?l=u-boot&m=133881742422888&w=2
Thanks, Sricharan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot